Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo

This is the Align T-Rex 600 Nitro V2 "Limited Edition" Helicopter Combo Kit. The T-Rex 600N V2 is geared up with a re-designed rotor head system with several adjustment holes, enabling the device to be fine tuned for either high control resolution or high stability based on the requirements of the specific pilot. In addition, the T-REX 600N V2 features a range of efficiency upgrade parts for a renewed appearance and enhanced efficiency. Plus, this combo package consists of a 600D PRO Carbon fiber blade set, 3 DS610 digital cyclic servos, a DS620 digital rudder servo, the GP900 head lock gyro combo and a 2 In 1 voltage regulator combo!
600N V2 Includes:
600 sized programmable head assembly with 3 sets of positive and unfavorable deltas, many Bell and Hiller mixing ratios offered, along with various flybar ratio settings.
The head assembly allows pilots to benefit from higher control resolution in addition to stability level, pleasing the requirement of both extremely steady fixed classifications in addition to accuracy aerobatic categories.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is contributed to the top of the main gear center to guarantee steady rotation, and remove one way bearing jamming.
Re-designed unibody stainless steel tail drive gear center mount, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly using 5mm carbon rod and metal adapters, resulting in enhanced rudder control precision.
Re-designed tail transmission, with visually pleasing material and enhanced maintenance.
Efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
Highly effective lightened engine cooling fan, minimizing engine load and enhancing cooling efficiency.
Large diameter clutch system with unique setup technique for great balance, minimal vibration, and reliable power transfer.
Forward mounted rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder action and exceptional tail locking ability.
Unique H random sample formed electronic mounting platform for easy electronic mounting and protection.
Large capacity 440cc fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch supporting point makes use of 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Light weight extremely agile flybar system.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with principles from big helicopter competitors, for the best fixed and dynamic flight performance.
GP900 Head Lock Gyro Includes:
Makes Use Of MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are small, extremely trusted, and extremely steady.
16 bit high processing speed CPU is utilized for ultra high resolution, resulting in higher rudder accuracy than formerly possible, even on modern high powered helicopters.
Supports Spektrum and JR satellites, conventional receiver not needed.
Supports Futabs S-BUS system.
Supports both digital and analog servos.
Supports both large and narrow band receivers.
Integrated RCE-G600 speed guv function, therefore GP900 can supply speed guv function without additional electronics.
Suitable for all 200 to 700 size radiance engine and electric helicopters
Greater vibration resistance than other systems. Superior efficiency is possible even with harder mounting foam tapes.
Support parameter setting through PC user interface, in addition to firmware updates.
Anti-torque payment. Optimal tail locking possible no matter if gyro is mounted upright or inverted.
600N V2 Specs:

Length: 1160mm

Height: 398mm

Main blade length: 600mm

Main rotor diameter: 1350mm

Tail rotor diameter: 240mm

Engine pinion gear: 20T

Autorotation tail drive gear: 180T

Drive gear ratio: 8.5:1:4.5(E:M:T)

Flying weight: Approx. 3200g
GP900 Specs:

Running Voltage: DC 3.5~8.4V

Existing Intake: <80mA @ 4.8V

Angular Detection Speed: 600 degrees/sec

Operating Humidity: -20℃~65℃

RoHS certification: Yes

Operating Humidity: 0%~95%

Size: 36.5x25.2x15.6mm

Weight: 11g
Includes:
(1) T-REX 600 Nitro V2 kit
(1) 600D PRO Carbon fiber blade set
(3) DS610 Digital servo
(1) DS620 Digital servo
(1) GP900 Head lock gyro combo
(1) 2 In 1 voltage regulator combo
Needed to Complete:
7-channel or more, helicopter radio system
(1) Standard servo
(1) .50 class engine
(1) .50 class muffler
(1) Pitch gauge
(1) Super starter
Fuel & Fuel pump