Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Set. This extraordinary bundle includes not only the T-Rex 550E DFC helicopter, however likewise a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have actually likewise been included, supplying you with an unbelievable helicopter package and a similarly remarkable electronics bundle all in the very same box.
550E DFC Features:
Geared up with the low CG DFC rotor head, successfully reduces wind resistance throughout flight, supplying the most direct and accurate control feel back to the pilot, exibiting exciting 3D performance and unimaginable flight speed.
High specification MOD1 CNC helical main gear increases gear mesh area, and lessens gear sound throughout flight.
Light-weight rigid metal main shaft bearing obstructs.
High quality tail gearbox design, integrated with dual point installed tail pitch control assembly to minimize slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control efficiency.
Body install increases body rigidness and included gyro placement place.
Re-designed rear installed rudder servo install.
Geared up with MX series high efficiency brushless motor.
2.0mm 3K carbon fiber side frame for basic yet rigid frame building, allowing for easy assembly and maintenance.
High speed ranked thrust bearings in tail blade grips.
High efficiency torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Features:
Revamped 3GX represents the next generation of multi function flybarless system. The drastically enhanced performance will produce an immediate impact on any enthusiasts.
3GX is presently the tiniest and lightest flybarless system on the market. Two ports to straight link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated instructions on the computer system setup software application directs the user through a step by step setup procedure, allowing for quick setups without leaving out any actions.
Support Bluetooth connection. With the soon to be released Bluetooth connection package, 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live modifications to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, reducing electronic wire clutter.
Custom specifications have actually been opened up in 3GX to enable pilots to fine tune various settings for swashplate and rudder. Settings export function permits customized settings to be shared among friends.
3GX makes use of gyroscope sensing units of the greatest specifications when compared with other flybarless systems presently on the market, allowing it to be used under severe conditions. Double axis plus rudder sensing unit drastically improves swashplate and rudder correction accuracy compared with last generation 3G. This is clearly obvious in stable hover as well as extremely aerobatic regimens.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The exceptional vibration resistant characteristic appears even when installed with more difficult double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The outcome is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with accuracy.
3GX's rudder permits consistent rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the best combination between 3GX and helicopter.
Support with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize and hold position and altitude, as well as self-governing way point flights and return house functions.
3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in guv function: Yes

Maximum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 131T

Tail Own Equipment: 34T

Own Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable charger
Dial Pitch Gauge and numerous tools for assembly