Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Kit. This incredible package includes not just the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Furthermore, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually also been included, supplying you with an amazing helicopter package and an equally impressive electronic devices package all in the exact same box.
550E DFC Features:
Equipped with the low CG DFC rotor head, successfully minimizes wind resistance during flight, supplying the most direct and accurate control feel back to the pilot, exibiting thrilling 3D performance and unimaginable flight speed.
High specification MOD1 CNC helical primary equipment increases equipment mesh location, and reduces equipment sound during flight.
Light-weight stiff metal primary shaft bearing obstructs.
High quality tail transmission style, integrated with double point mounted tail pitch control assembly to lessen slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control efficiency.
Body mount boosts body rigidity and added gyro placement place.
Re-designed rear mounted rudder servo mount.
Equipped with MX series high efficiency brushless motor.
2.0mm 3K carbon fiber side frame for basic yet stiff frame building, allowing for simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High efficiency torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the ultimate fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Features:
Redesigned 3GX represents the next generation of multi function flybarless system. The dramatically enhanced performance will create an instant impact on any lovers.
3GX is presently the smallest and lightest flybarless system on the market. 2 ports to directly link Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic highlighted guidelines on the computer system setup software directs the user through a step by step setup procedure, allowing for quick setups without leaving out any steps.
Assistance Bluetooth connectivity. With the soon to be released Bluetooth connectivity package, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps permitting live modifications to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, decreasing electronic wire clutter.
Customized specifications have actually been opened up in 3GX to enable pilots to fine tune numerous settings for swashplate and rudder. Settings export function permits custom settings to be shared among buddies.
3GX uses gyroscope sensors of the greatest specs when compared with other flybarless systems presently on the market, permitting it to be used under severe conditions. Double axis plus rudder sensing unit dramatically enhances swashplate and rudder correction precision compared with last generation 3G. This is clearly noticeable in stable hover in addition to extremely aerobatic regimens.
Suitable for helicopter of all class from 200 to 700, radiance engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with more difficult double sided mounting tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, together with a completely re-written firmware. The outcome is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive dexterity.
With integrated in pirouette settlement function, 3GX is able to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the best integration in between 3GX and helicopter.
Assistance with APS gyro system and supplies more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support and hold position and altitude, in addition to self-governing method point flights and return house functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Built in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable battery charger
Dial Pitch Gauge and different tools for assembly