Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Set. This amazing bundle consists of not just the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have also been consisted of, providing you with an unbelievable helicopter kit and an equally outstanding electronic devices bundle all in the same box.
550E DFC Functions:
Geared up with the low CG DFC rotor head, successfully decreases wind resistance throughout flight, providing the most direct and exact control feel back to the pilot, exibiting exhilarating 3D efficiency and unimaginable flight speed.
High specification MOD1 CNC helical main equipment increases equipment mesh location, and reduces equipment sound throughout flight.
Light-weight stiff metal main shaft bearing obstructs.
High quality tail transmission style, integrated with double point installed tail pitch control assembly to minimize slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control efficiency.
Body mount increases body rigidness and added gyro positioning location.
Re-designed rear installed rudder servo mount.
Geared up with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for basic yet stiff frame building, permitting simple assembly and upkeep.
High speed ranked thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the supreme fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Functions:
Upgraded 3GX represents the next generation of multi function flybarless system. The considerably improved efficiency will produce an instant influence on any lovers.
3GX is currently the tiniest and lightest flybarless system on the market. 2 ports to directly link Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate systems currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer setup software directs the user through an action by step setup process, permitting fast setups without omitting any steps.
Assistance Bluetooth connection. With the soon to be launched Bluetooth connection kit, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, decreasing electronic wire mess.
Custom parameters have been opened up in 3GX to enable pilots to tweak various settings for swashplate and rudder. Settings export function permits custom settings to be shared among pals.
3GX utilizes gyroscope sensors of the greatest specs when compared with other flybarless systems currently on the market, allowing it to be used under severe conditions. Double axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly noticeable in steady hover as well as extremely aerobatic regimens.
Suitable for helicopter of all class from 200 to 700, radiance engine or electrical powered. The superior vibration resistant attribute appears even when installed with harder double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the ideal combination in between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and elevation, as well as self-governing way point flights and return house functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Built in governor function: Yes

Optimum working voltage: 8.5V
550E DFC Specs:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 131T

Tail Own Equipment: 34T

Own Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable battery charger
Dial Pitch Gauge and different tools for assembly