Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combination Helicopter Kit. This amazing bundle consists of not only the T-Rex 550E DFC helicopter, however likewise a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have actually likewise been consisted of, supplying you with an incredible helicopter package and an equally outstanding electronics bundle all in the very same box.
550E DFC Features:
Geared up with the low CG DFC rotor head, successfully decreases wind resistance during flight, supplying the most direct and accurate control feel back to the pilot, exibiting exciting 3D efficiency and inconceivable flight speed.
High specification MOD1 CNC helical main gear increases gear mesh area, and minimizes gear noise during flight.
Lightweight stiff metal main shaft bearing obstructs.
High quality tail transmission design, combined with dual point installed tail pitch control assembly to lessen slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control efficiency.
Body mount increases body rigidness and included gyro positioning area.
Re-designed rear installed rudder servo mount.
Geared up with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for simple yet stiff frame construction, enabling simple assembly and upkeep.
High speed ranked thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Features:
Revamped 3GX represents the next generation of multi function flybarless system. The considerably enhanced efficiency will create an immediate influence on any enthusiasts.
3GX is presently the smallest and lightest flybarless system on the marketplace. Two ports to straight link Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate systems presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphic showed instructions on the computer setup software directs the user through an action by action setup process, enabling fast setups without omitting any actions.
Assistance Bluetooth connection. With the soon to be launched Bluetooth connection package, 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live modifications to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, minimizing electronic wire clutter.
Custom specifications have actually been opened up in 3GX to permit pilots to fine tune various settings for swashplate and rudder. Settings export function enables custom settings to be shared among friends.
3GX uses gyroscope sensing units of the greatest requirements when compared to other flybarless systems presently on the marketplace, enabling it to be used under extreme conditions. Double axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision compared to last generation 3G. This is plainly noticeable in stable hover in addition to extremely aerobatic routines.
Ideal for helicopter of all class from 200 to 700, radiance engine or electric powered. The superior vibration resistant characteristic is evident even when installed with more difficult double sided mounting tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, together with a totally re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
3GX's rudder enables constant rudder feel even under high speed conditions. This excellent control feel will permit pilots of all skill levels to experience the best integration in between 3GX and helicopter.
Assistance with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize and hold position and altitude, in addition to self-governing method point flights and return home functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible battery charger
Dial Pitch Gauge and various tools for assembly