Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Set. This incredible bundle includes not only the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have also been consisted of, offering you with an unbelievable helicopter kit and a similarly excellent electronics bundle all in the exact same box.
550E DFC Features:
Equipped with the low CG DFC rotor head, effectively reduces wind resistance during flight, offering the most direct and exact control feel back to the pilot, exibiting exciting 3D efficiency and unthinkable flight speed.
High specification MOD1 CNC helical primary gear increases gear mesh location, and decreases gear noise during flight.
Lightweight stiff metal primary shaft bearing blocks.
High quality tail transmission design, combined with double point installed tail pitch control assembly to decrease slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control effectiveness.
Body install increases body rigidity and included gyro positioning area.
Re-designed rear installed rudder servo install.
Equipped with MX series high efficiency brushless motor.
2.0mm 3K carbon fiber side frame for simple yet stiff frame construction, allowing for simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High efficiency torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the supreme fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Features:
Revamped 3GX represents the next generation of multi function flybarless system. The considerably enhanced efficiency will create an immediate impact on any lovers.
3GX is currently the smallest and lightest flybarless system on the market. 2 ports to directly link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer setup software directs the user through a step by action setup procedure, allowing for fast setups without omitting any actions.
Assistance Bluetooth connection. With the quickly to be released Bluetooth connection kit, 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, reducing electronic wire clutter.
Custom parameters have been opened up in 3GX to allow pilots to tweak numerous settings for swashplate and rudder. Settings export feature permits custom-made settings to be shared among good friends.
3GX makes use of gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, enabling it to be used under extreme conditions. Dual axis plus rudder sensing unit considerably enhances swashplate and rudder correction accuracy compared to last generation 3G. This is clearly noticeable in stable hover as well as extremely aerobatic routines.
Ideal for helicopter of all class from 200 to 700, radiance engine or electric powered. The exceptional vibration resistant attribute appears even when installed with more difficult double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The result is a remarkable stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette compensation function, 3GX is able to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with accuracy.
3GX's rudder permits constant rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all ability levels to experience the best integration between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support and hold position and altitude, as well as autonomous method point flights and return home functions.
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in governor function: Yes

Optimum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 131T

Tail Drive Equipment: 34T

Drive Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable battery charger
Dial Pitch Gauge and different tools for assembly