Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Set. This extraordinary bundle consists of not just the T-Rex 550E DFC helicopter, however likewise a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber primary blades and 90mm 3k carbon fiber tail blades have actually likewise been consisted of, supplying you with an unbelievable helicopter set and a similarly remarkable electronics bundle all in the same box.
550E DFC Functions:
Equipped with the low CG DFC rotor head, efficiently decreases wind resistance throughout flight, supplying the most direct and accurate control feel back to the pilot, exibiting exhilarating 3D performance and unthinkable flight speed.
High specification MOD1 CNC helical primary gear increases gear mesh area, and minimizes gear noise throughout flight.
Lightweight stiff metal primary shaft bearing blocks.
High quality tail transmission design, integrated with double point mounted tail pitch control assembly to minimize slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder locking and control effectiveness.
Body mount boosts body rigidness and included gyro placement location.
Re-designed rear mounted rudder servo mount.
Equipped with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for easy yet stiff frame construction, allowing for simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro mounting platform.
Aerodynamically styled canopy for the ultimate fit.
Equipped with T-REX 600 class tail boom set, supporting with 600mm primary blades and increased tail stability
3GX Functions:
Upgraded 3GX represents the next generation of multi function flybarless system. The dramatically enhanced performance will produce an immediate impact on any enthusiasts.
3GX is presently the smallest and lightest flybarless system on the market. Two ports to directly link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a basic process. In addition, the 3GX can support all of the CCPM swashplate systems presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer system setup software application directs the user through a step by step setup process, allowing for fast setups without omitting any steps.
Assistance Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity set, 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, minimizing electronic wire mess.
Custom parameters have actually been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export function enables custom settings to be shared among buddies.
3GX utilizes gyroscope sensing units of the greatest specifications when compared with other flybarless systems presently on the market, enabling it to be used under severe conditions. Double axis plus rudder sensor dramatically enhances swashplate and rudder correction accuracy compared with last generation 3G. This is clearly visible in steady hover as well as highly aerobatic regimens.
Appropriate for helicopter of all class from 200 to 700, glow engine or electric powered. The exceptional vibration resistant characteristic appears even when mounted with more difficult double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX is able to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all ability levels to experience the perfect combination between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize and hold position and elevation, as well as autonomous way point flights and return house functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Built in guv function: Yes

Optimum working voltage: 8.5V
550E DFC Specs:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 131T

Tail Drive Equipment: 34T

Drive Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Total:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & suitable charger
Dial Pitch Gauge and different tools for assembly