Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Kit. This amazing package includes not only the T-Rex 550E DFC helicopter, but also a Castle Talon 90 ESC and 600MX motor, three DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Additionally, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have also been consisted of, supplying you with an amazing helicopter package and an equally excellent electronics package all in the very same box.
550E DFC Functions:
Geared up with the low CG DFC rotor head, successfully reduces wind resistance during flight, supplying the most direct and exact control feel back to the pilot, exibiting thrilling 3D performance and unthinkable flight speed.
High specification MOD1 CNC helical main gear increases gear mesh location, and minimizes gear sound during flight.
Lightweight stiff metal main shaft bearing blocks.
High quality tail transmission style, combined with dual point mounted tail pitch control assembly to decrease slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control efficiency.
Body mount boosts body rigidity and included gyro positioning location.
Re-designed rear mounted rudder servo mount.
Geared up with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for basic yet stiff frame building, allowing for simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Functions:
Revamped 3GX represents the next generation of multi function flybarless system. The dramatically enhanced performance will create an instant effect on any enthusiasts.
3GX is currently the tiniest and lightest flybarless system on the market. 2 ports to straight link Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all the CCPM swashplate systems currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic highlighted directions on the computer system setup software directs the user through a step by action setup procedure, allowing for quick setups without leaving out any actions.
Support Bluetooth connection. With the quickly to be released Bluetooth connection package, 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, minimizing electronic wire mess.
Custom specifications have been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export function allows customized settings to be shared amongst good friends.
3GX utilizes gyroscope sensing units of the greatest specifications when compared with other flybarless systems currently on the market, enabling it to be used under extreme conditions. Dual axis plus rudder sensing unit dramatically improves swashplate and rudder correction precision compared with last generation 3G. This is clearly visible in steady hover as well as extremely aerobatic routines.
Ideal for helicopter of all class from 200 to 700, glow engine or electrical powered. The exceptional vibration resistant quality is evident even when mounted with harder double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to a totally re-written firmware. The result is a remarkable stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
3GX's rudder allows constant rudder feel even under high speed conditions. This excellent control feel will allow pilots of all skill levels to experience the best combination in between 3GX and helicopter.
Support with APS gyro system and offers more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self stabilize and hold position and elevation, as well as autonomous method point flights and return house functions.
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Built in guv function: Yes

Optimum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 131T

Tail Drive Gear: 34T

Drive Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Consists of:
(1) T-REX 550E DFC Kit
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible battery charger
Dial Pitch Gauge and numerous tools for assembly