Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Set. This extraordinary package includes not just the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. In addition, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have actually also been included, supplying you with an unbelievable helicopter kit and a similarly remarkable electronic devices package all in the exact same box.
550E DFC Functions:
Geared up with the low CG DFC rotor head, successfully reduces wind resistance during flight, supplying the most direct and accurate control feel back to the pilot, exibiting thrilling 3D efficiency and inconceivable flight speed.
High specification MOD1 CNC helical main gear increases gear mesh area, and minimizes gear sound during flight.
Lightweight rigid metal main shaft bearing obstructs.
High quality tail transmission style, integrated with dual point installed tail pitch control assembly to minimize slops and increase rudder control accuracy.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control efficiency.
Body mount boosts body rigidity and added gyro placement area.
Re-designed rear installed rudder servo mount.
Geared up with MX series high performance brushless motor.
2.0mm 3K carbon fiber side frame for simple yet rigid frame building and construction, allowing for simple assembly and upkeep.
High speed rated thrust bearings in tail blade grips.
High performance torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the supreme fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Functions:
Revamped 3GX represents the next generation of multi function flybarless system. The drastically improved efficiency will create an instant effect on any enthusiasts.
3GX is currently the tiniest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate systems currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic showed guidelines on the computer system setup software directs the user through an action by action setup procedure, allowing for fast setups without leaving out any actions.
Assistance Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps permitting live modifications to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, lowering electronic wire mess.
Custom parameters have actually been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export feature allows custom-made settings to be shared amongst buddies.
3GX utilizes gyroscope sensors of the highest specs when compared with other flybarless systems currently on the marketplace, permitting it to be used under harsh conditions. Dual axis plus rudder sensing unit drastically improves swashplate and rudder correction accuracy compared with last generation 3G. This is clearly visible in steady hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant quality appears even when installed with more difficult double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The outcome is a significant stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive dexterity.
With integrated in pirouette compensation function, 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily carried out with accuracy.
3GX's rudder allows consistent rudder feel even under high speed conditions. This outstanding control feel will allow pilots of all ability levels to experience the perfect combination between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and elevation, as well as self-governing way point flights and return home functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system support: Yes

Integrated in guv function: Yes

Maximum working voltage: 8.5V
550E DFC Requirements:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Diameter: 1188mm

Tail Rotor Diameter: 254mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 131T

Tail Own Gear: 34T

Own Gear Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Set
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Had to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible charger
Dial Pitch Gauge and various tools for assembly