Align T-REX 550E DFC Super Combo Helicopter Kit w/Motor, ESC, 4 Servo

This is the Align T-REX 550E DFC Super Combo Helicopter Package. This extraordinary bundle includes not just the T-Rex 550E DFC helicopter, however also a Castle Talon 90 ESC and 600MX motor, 3 DS615 digital cyclic servos, a DS655 digital tail servo and the 3GX flybarless system. Furthermore, 520mm carbon fiber main blades and 90mm 3k carbon fiber tail blades have actually also been included, offering you with an unbelievable helicopter set and an equally excellent electronic devices bundle all in the exact same box.
550E DFC Features:
Geared up with the low CG DFC rotor head, efficiently decreases wind resistance during flight, offering the most direct and accurate control feel back to the pilot, exibiting thrilling 3D performance and unimaginable flight speed.
High specification MOD1 CNC helical main gear increases gear mesh area, and lessens gear noise during flight.
Light-weight rigid metal main shaft bearing blocks.
High quality tail transmission design, integrated with double point mounted tail pitch control assembly to lessen slops and increase rudder control precision.
High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to enhance rudder locking and control efficiency.
Body install boosts body rigidness and added gyro positioning area.
Re-designed rear mounted rudder servo install.
Geared up with MX series high effectiveness brushless motor.
2.0mm 3K carbon fiber side frame for basic yet rigid frame construction, permitting simple assembly and upkeep.
High speed ranked thrust bearings in tail blade grips.
High effectiveness torque tube tail drive.
Integrated swash anti-rotation guide and gyro installing platform.
Aerodynamically styled canopy for the ultimate fit.
Geared up with T-REX 600 class tail boom set, supporting with 600mm main blades and increased tail stability
3GX Features:
Redesigned 3GX represents the next generation of multi function flybarless system. The considerably enhanced performance will create an immediate impact on any enthusiasts.
3GX is currently the tiniest and lightest flybarless system on the marketplace. Two ports to straight connect Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated directions on the computer system setup software application directs the user through a step by action setup process, permitting quick setups without leaving out any actions.
Assistance Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity set, 3GX can be set wirelessly from a PC. Ultimately there will also be smartphone apps allowing live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, decreasing electronic wire clutter.
Custom parameters have actually been opened up in 3GX to permit pilots to tweak numerous settings for swashplate and rudder. Settings export feature permits custom-made settings to be shared among buddies.
3GX uses gyroscope sensors of the highest specifications when compared with other flybarless systems currently on the marketplace, allowing it to be used under harsh conditions. Double axis plus rudder sensing unit considerably improves swashplate and rudder correction precision compared with last generation 3G. This is clearly obvious in steady hover as well as highly aerobatic regimens.
Ideal for helicopter of all class from 200 to 700, glow engine or electrical powered. The exceptional vibration resistant characteristic is evident even when mounted with more difficult double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The result is a remarkable stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette settlement function, 3GX is able to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
3GX's rudder permits constant rudder feel even under high speed conditions. This excellent control feel will permit pilots of all skill levels to experience the perfect integration between 3GX and helicopter.
Assistance with APS gyro system and provides more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize and hold position and altitude, as well as self-governing way point flights and return house functions.
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Futaba S.BUS system assistance: Yes

Built in governor function: Yes

Maximum working voltage: 8.5V
550E DFC Specifications:

Length: 1160mm

Height: 330mm

Main Blade Length: 520mm

Main Rotor Size: 1188mm

Tail Rotor Size: 254mm

Motor Drive Equipment: 11T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 131T

Tail Drive Equipment: 34T

Drive Equipment Ratio: 1:10.18:3.85

Weight (With Motor): 1800g
Includes:
(1) T-REX 550E DFC Package
(1) Castle Talon 90 Brushless ESC
(1) 520 Carbon fiber blade set
(3) DS615 Digital servo
(1) DS655 Digital servo
(1) 3GX Flybarless System
(1) 600MX Brushless Motor
(1) 90mm 3K Carbon Fiber Tail Blade
Needed to Complete:
7-channel or more helicopter radio system
6S 2600 ~ 5200mAh Li-Po battery & compatible charger
Dial Pitch Gauge and different tools for assembly