Align T-Rex 550E 3GX Combo

Align T-Rex 550E 3GX Super Combo V2 with 3GX compact flybarless system. Recently developed aerodynamically efficient metal primary blade control system, with high rigidit and remarkable control accuracy. High performance torque tube drive.

Features:

• Recently developed aerodynamically efficient metal primary blade control system, with high rigidity and remarkable control accuracy
• New lightweight high accuracy primary gear, with outstanding balance and stability
• The most ideal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic
• New lightweight stiff metal primary shaft bearing obstructs
• Integrated swash anti-rotation guide and gyro mounting platform
• Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more structured style likewise enables easier disassembly
• Dual section battery mount for ideal CG position based on battery weight
• 3K carbon fiber side frame and base plate, basic yet extremely stiff for ease of maintenance
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder lockingand control efficiency
• Recently developed rear installed rudder servo mount, for pleasing aesthetic in addition to enhancing side frame strength and security to the rudder servo
• High speed ranked thrust bearings in tail blade grips.
• High performance torque tube drive
• Additional radial bearing is added to the one method bearing block to guarantee smooth rotation, and remove jammed one method bearing
• High strength carbon fiber utilized on tail fins and tail boom supports
• New lightweight landing equipments
• High grade airbrushed fiberglass canopy

Brand new upgraded 3GX represents a new generation of multi function flybarless system. The drastically enhanced efficiency will create instant influence on any enthusiasts.

3GX is presently the tiniest and lightest flybarless system on the marketplace. Two ports to directly link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.

Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.

Graphical illustrated guideline on the computer setup software directs the user through a step by step setup procedure, allowing for fast setups without leaving out any steps.

Support Bluetooth connection. With the quickly to be released Bluetooth connection package, 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live adjustments to 3GX without powering down.

With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.

A library of pre-configured 3GX settings particularly readily available for T-Rex series of helicopters, permitting pilots to achieve the most ideal setup for their helicopters.

Three levels of flight mode is readily available on the 3GX to provide various feels from novices to sophisticated pilots.

Custom specifications have actually been opened up in 3GX to permit pilots to tweak numerous settings for swashplate and rudder. Settings export feature enables custom settings to be shared amongst friends.

3GX makes use of brand new gyroscope sensors of the highest requirements when compared with other flybarless systems presently on the marketplace, permitting it to be utilized under extreme conditions. Dual axis plus rudder sensor drastically enhances swashplate and rudder correction accuracy compared with last generation 3G. This is plainly visible in stable hover in addition to extremely aerobatic routines.

Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The remarkable vibration resistant attribute is evident even when installed with more difficult double sided mounting tape.

3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a significant stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.

With integrated in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly accomplished with accuracy.

3GX's rudder control is similar to the high-end GP-780 gyro because rudder level of sensitivity is catered particularly for the helicopter's rudder reaction attributes, permitting constant rudder feel even under high speed conditions. This outstanding control feel will permit pilot of all ability levels to experience the ideal combination in between 3GX and helicopter.

Additional peripherals prepared for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the typically readily available position hold gyro system makes use of only 6 sensors, 3GX's total of 10 sensors guarantee positioning of helicopter with remarkable precision, supplying the supreme service for aerial photography or other special purposes.

Requires:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 2600 ~ 5200mAh
Dial Pitch Gauge

Keep in mind: Users should have a specific principle of security to operate the R/C helicopters. Be sure to check out and abide by related safety notes of user's manual before flying.

Specifications:

Length: 1042mm
Height: 364mm
Maim Blade Length: 520mm
Main Rotor Diameter: 1188mm
Tail Rotor Diameter: 254mm
Motor Drive Gear: 16T
Main Drive Gear: 170T
Autorotaion Tail Drive Gear: 180T
Tail Drive Gear: 40T
Drive Gear Ratio: 1:10.62:4.5
Weight (With Motor): 1800g
Flying Weight: Approximate 2800g