Align T-Rex 550E 3GX Combo

Align T-Rex 550E 3GX Super Combination V2 with 3GX compact flybarless system. Recently designed aerodynamically efficient metal primary blade control system, with high rigidit and superior control precision. High efficiency torque tube drive.

Features:

• Recently designed aerodynamically efficient metal primary blade control system, with high rigidness and superior control precision
• New lightweight high precision primary gear, with outstanding balance and stability
• The most optimum motor pinion ratio and tail gear ratio to attain the most efficient power output and flight particular
• New lightweight stiff metal primary shaft bearing blocks
• Integrated swash anti-rotation guide and gyro mounting platform
• Brand name new CNC machined metal tail gear box, with thicker side plates to increase rigidness. The more structured design also enables simpler disassembly
• Double area battery mount for optimum CG position based on battery weight
• 3K carbon fiber side frame and base plate, easy yet extremely stiff for ease of maintenance
• High quality 5mm carbon rod and CNC metal tail scissor control arms are utilized in rudder control system to improve rudder lockingand control effectiveness
• Recently designed rear mounted rudder servo mount, for pleasing aesthetic along with enhancing side frame strength and protection to the rudder servo
• High speed rated thrust bearings in tail blade grips.
• High efficiency torque tube drive
• Additional radial bearing is added to the one way bearing block to make sure smooth rotation, and remove jammed one way bearing
• High strength carbon fiber utilized on tail fins and tail boom supports
• New lightweight landing equipments
• High grade airbrushed fiberglass canopy

Brand name new revamped 3GX represents a new generation of multi function flybarless system. The significantly enhanced efficiency will create immediate impact on any enthusiasts.

3GX is currently the smallest and lightest flybarless system on the market. Two ports to straight connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.

Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through an easy process. In addition, the 3GX can support all the CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.

Graphical showed guideline on the computer system setup software directs the user through an action by step setup process, permitting fast setups without omitting any steps.

Support Bluetooth connection. With the quickly to be launched Bluetooth connection package, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps permitting live modifications to 3GX without powering down.

With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed to lower electronic wire clutters.

A library of pre-configured 3GX settings particularly offered for T-Rex series of helicopters, permitting pilots to attain the most optimum setup for their helicopters.

Three levels of flight mode is offered on the 3GX to offer various feels from novices to advanced pilots.

Custom criteria have been opened up in 3GX to allow pilots to tweak various settings for swashplate and rudder. Settings export feature enables custom settings to be shared among pals.

3GX utilizes brand new gyroscope sensors of the highest specs when compared with other flybarless systems currently on the market, permitting it to be utilized under severe conditions. Double axis plus rudder sensing unit significantly improves swashplate and rudder correction precision compared with last generation 3G. This is plainly obvious in steady hover along with extremely aerobatic routines.

Suitable for helicopter of all class from 200 to 700, glow engine or electrical powered. The superior vibration resistant quality is evident even when mounted with harder double sided mounting tape.

3GX utilizes 16 bit processor which is 4 times faster than previous generation, together with an entirely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.

With integrated in pirouette compensation function, 3GX is able to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are easily accomplished with precision.

3GX's rudder control is similar to the luxury GP-780 gyro in that rudder level of sensitivity is catered particularly for the helicopter's rudder action attributes, permitting constant rudder feel even under high speed conditions. This outstanding control feel will allow pilot of all skill levels to experience the best combination in between 3GX and helicopter.

Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly offered position hold gyro system utilizes just 6 sensors, 3GX's overall of 10 sensors make sure positioning of helicopter with superior precision, offering the ultimate service for aerial photography or other unique purposes.

Requires:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 2600 ~ 5200mAh
Dial Pitch Gauge

Keep in mind: Users need to have a specific idea of security to run the R/C helicopters. Be sure to check out and comply with associated security notes of user's manual prior to flying.

Specifications:

Length: 1042mm
Height: 364mm
Maim Blade Length: 520mm
Main Rotor Diameter: 1188mm
Tail Rotor Diameter: 254mm
Motor Drive Equipment: 16T
Main Drive Equipment: 170T
Autorotaion Tail Drive Equipment: 180T
Tail Own Equipment: 40T
Own Equipment Ratio: 1:10.62:4.5
Weight (With Motor): 1800g
Flying Weight: Approx 2800g