Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in numerous of innovations, the brand name brand-new T-REX 500X is now ready to go. More attractive and imaginative style concepts are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and improve, T-REX 500X adjust with brand name brand-new FL rotor head system, uses an extremely low CG style which lowers resistance throughout 3D maneuvers while increasing flight responsiveness and precision. A progressive style adds a gloss silver and red anodizing look which continue our quality development based on our 700 class helicopter. The T-REX 500X primary frame uses composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a leading motor install style. Innovative adjustable belt guide pulley-block, allows a convenient way to adjust the belt tension by launching or tightening up the screw. The screw is used to preserve optimal belt tension in time to keep the very best. Likewise T-REX 500X landing skid is tilted 5 degrees forward to enhance crashworthiness.

T-REX 500X uses 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The most recent brand-new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V offering effective and remarkable power. The NEW DS530M/DS535M digital servos are with extreme torque and speed action enable to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the big scale helicopters. It will re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500X efficiently enhance the flying stability and power performance. Boost the power for much better control enable to delight in T-REX 500X flights exact same like other plus size helicopters.

New 78 size tail blades are longer in length and offer remarkable and precise tail holding performance, even throughout requiring 3D flight.

The brand name brand-new low CG 500FL Flybarless Rotor Head System uses the precision grinding of high-carbon steel hollow shaft efficiently increase its concentricity. Permit to reduce resistance throughout 3D maneuvers, increased flight responsiveness and precision. In addition, the styling look harmony with red anodized and stainless color, highlight the high quality much like 700 size 3D helicopter.

New Swashplate style with precise bearings functions in no slop providing a precise and accurate controlled flight.

New 520MX(1600KV/3527) motor features high performance, remarkable power, excellent torque, low existing draw, and a low operating temperature. Permit to supply keeping constant torque and head speed through continuous 3D maneuvers.

Brand brand-new CNC metal support plate and brace compare with frame mounting bolt efficiently increase the torsional stength of primary frame, under extreme 3D maneuver, you can strongly feel its strong support from its structure. In addition, the styling look harmony with red anodized and stainless color highlight the high tactile appeal.
Carbon fiber side frame plates are manufactured utilizing an exclusive composite material integration technology which incorporates the battery mounting rails into the frame. This unique use of open areas within the frame develops a stiff frame and is visually pleasing.

An additional 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

RCE-BL80X is specially created for T-REX 500X offering greater currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be established based on servo specification.

Brand brand-new latching battery tray which uses integrated mounting rails inside the frames to simplify insertion / removal of battery while offering protection for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support approximately 8.4V for remarkable responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide pulley-block, allows a convenient way to adjust the belt tension by launching or tightening up the screw. The screw is used to preserve optimal belt tension over time.
Brand New Belt Drive Assembly style enable quiet operation and low expense on serviceability.

Ultilize of strengthen primary gear case functions in utilizing bigger bearing has a greater load carry capacity which lowers the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The brand-new primary gear case and all-metal central pulley-block transmission system is an effective style to provide the supreme performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

A 19mm broad Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is useful and improves the helicopters tail control.

The freshly created dual point supported tail control assembly provides slop complimentary performance while enhancing rudder resolution and precision.

The brand-new tail rotor holder style includes thrust bearings which increases toughness, in addition to significantly enhancing the precision and performance of the tail performance when utilizing 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Size: 1054mm
? Tail Rotor Size: 219mm
? Motor Pinion Gear: 12T
? Main Drive Gear: 134T
? Main Drive Wheel: 80T
? Tail Own Gear: 21T
? Own Gear Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X SET Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh tip)
?Digital Pitch Gauge