Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in numerous of developments, the brand name brand-new T-REX 500X is now ready to go. More attractive and innovative design concepts are all in here, it definitely would be your favorite T-REX 500X model ever.

Refresh and improve, T-REX 500X adjust with brand name brand-new FL rotor head system, uses an incredibly low CG design which decreases resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing look which continue our quality advancement based on our 700 class helicopter. The T-REX 500X primary frame uses composite product integration innovation on carbon side frame plates, including the addition of battery installing side rails, and a top motor install design. Ingenious adjustable belt guide sheave, permits a practical method to change the belt stress by launching or tightening up the screw. The screw is used to maintain optimum belt stress in time to keep the very best. Likewise T-REX 500X landing skid is slanted 5 degrees forward to enhance crashworthiness.

T-REX 500X uses 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The most recent brand-new RCE-BL80X Brushless ESC support double BEC output from 6 ~ 8.4V providing effective and remarkable power. The NEW DS530M/DS535M digital servos are with extreme torque and speed reaction enable to support faster, more accurate and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as steady and powerful like the big scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500X successfully enhance the flying stability and power efficiency. Improve the power for better control enable to take pleasure in T-REX 500X flights very same like other large size helicopters.

New 78 size tail blades are longer in length and offer remarkable and accurate tail holding efficiency, even during demanding 3D flight.

The brand name brand-new low CG 500FL Flybarless Rotor Head System uses the precision grinding of high-carbon steel hollow shaft successfully increase its concentricity. Enable to decrease resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling look harmony with red anodized and stainless color, draw out the high quality similar to 700 size 3D helicopter.

New Swashplate design with accurate bearings functions in zero slop providing an accurate and accurate regulated flight.

New 520MX(1600KV/3527) motor includes high performance, remarkable power, outstanding torque, low current draw, and a low operating temperature level. Enable to supply maintaining constant torque and head speed through continuous 3D maneuvers.

Brand brand-new CNC metal reinforcement plate and brace compare to frame installing bolt successfully increase the torsional stength of primary frame, under extreme 3D maneuver, you can strongly feel its strong reinforcement from its structure. In addition, the styling look harmony with red anodized and stainless color draw out the high tactile appeal.
Carbon fiber side frame plates are produced using a proprietary composite product integration innovation which integrates the battery installing rails into the frame. This special usage of open spaces within the frame creates a stiff frame and is aesthetically pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

RCE-BL80X is specially developed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Brand brand-new latching battery tray which uses incorporated installing rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for remarkable responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide sheave, permits a practical method to change the belt stress by launching or tightening up the screw. The screw is used to maintain optimum belt stress over time.
Brand New Belt Drive Assembly design enable quiet operation and low expense on serviceability.

Ultilize of strengthen primary gear case functions in using larger bearing has a greater load carry capability which decreases the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The brand-new primary gear case and all-metal main sheave transmission system is an efficient design to provide the supreme performance.

Landing skid is slanted 5 degrees forward to enhance crashworthiness.

A 19mm large Tail Boom to improves the torsional strength.
Carbon Fiber Tail Control Rod is useful and improves the helicopters tail control.

The recently developed double point supported tail control assembly delivers slop complimentary efficiency while improving rudder resolution and precision.

The brand-new tail rotor holder design consists of thrust bearings which increases sturdiness, as well as substantially improving the accuracy and performance of the tail efficiency when using 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Size: 1054mm
? Tail Rotor Size: 219mm
? Motor Pinion Equipment: 12T
? Main Drive Equipment: 134T
? Main Drive Sheave: 80T
? Tail Drive Equipment: 21T
? Drive Equipment Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X SET Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion)
?Digital Pitch Gauge