Align T-REX 500X Super Combo (Metal Case Servos)

Experienced in many of innovations, the brand name brand-new T-REX 500X is now all set to go. More appealing and imaginative design concepts are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand name brand-new FL rotor head system, uses an exceptionally low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality advancement based upon our 700 class helicopter. The T-REX 500X main frame uses composite material combination technology on carbon side frame plates, including the addition of battery installing side rails, and a leading motor install design. Innovative adjustable belt guide sheave, permits a convenient way to adjust the belt tension by releasing or tightening up the screw. The screw is used to keep optimum belt tension gradually to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to enhance crashworthiness.

T-REX 500X uses 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The latest brand-new RCE-BL80X Brushless ESC support double BEC output from 6 ~ 8.4V offering effective and remarkable power. The NEW DS530M/DS535M digital servos are with severe torque and speed reaction allow to support much faster, more accurate and precise flight performance.

Equipped with all the top end electronic gadgets, T-REX 500X is as stable and effective like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm main blades for T-REX 500X efficiently enhance the flying stability and power efficiency. Improve the power for better control allow to delight in T-REX 500X flights same like other plus size helicopters.

New 78 size tail blades are longer in length and deal remarkable and accurate tail holding efficiency, even during requiring 3D flight.

The brand name brand-new low CG 500FL Flybarless Rotor Head System uses the precision grinding of high-carbon steel hollow shaft efficiently increase its concentricity. Allow to lower resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance harmony with red anodized and stainless color, bring out the high quality much like 700 size 3D helicopter.

New Swashplate design with accurate bearings features in no slop providing an exact and precise controlled flight.

New 520MX(1600KV/3527) motor features high performance, remarkable power, exceptional torque, low current draw, and a low operating temperature level. Allow to supply preserving consistent torque and head speed through continuous 3D maneuvers.

Brand brand-new CNC metal support plate and brace compare to frame installing bolt efficiently increase the torsional stength of main frame, under severe 3D maneuver, you can strongly feel its strong support from its structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.
Carbon fiber side frame plates are made using an exclusive composite material combination technology which incorporates the battery installing rails into the frame. This unique use of open spaces within the frame creates a stiff frame and is visually pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

RCE-BL80X is specially created for T-REX 500X offering higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based upon servo specification.

Brand brand-new latching battery tray which uses incorporated installing rails inside the frames to simplify insertion / removal of battery while offering defense for the battery.

DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for remarkable responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide sheave, permits a convenient way to adjust the belt tension by releasing or tightening up the screw. The screw is used to keep optimum belt tension over time.
Brand New Belt Drive Assembly design enable peaceful operation and low expense on serviceability.

Ultilize of strengthen main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The brand-new main gear case and all-metal central sheave transmission system is an efficient design to provide the supreme performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

A 19mm broad Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

The freshly created double point supported tail control assembly provides slop free efficiency while enhancing rudder resolution and precision.

The brand-new tail rotor holder design consists of thrust bearings which increases toughness, as well as substantially enhancing the precision and performance of the tail efficiency when using 78 size Tail Blades.

Specification
? Length: 935mm
? Height: 259mm
? Width: 151mm
? Main Blade Length: 470mm
? Main Rotor Diameter: 1054mm
? Tail Rotor Diameter: 219mm
? Motor Pinion Equipment: 12T
? Main Drive Equipment: 134T
? Main Drive Sheave: 80T
? Tail Drive Equipment: 21T
? Drive Equipment Ratio: 11.17:1:3.81
? Weight(w/o battery): approx. 1450gAccessories

?T-REX 500X KIT Set x 1 
?Microbeast PLUS Flybarless System x 1 set
?470 Carbon Fiber Blades x 1
?78 Tail Rotor Blade x 1
?520MX Brushless Motor(1600KV/3527) x 1
?DS530M Digital servo x 3
?DS535M Digital servo x 1 
?RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
?Transmitter(7-channel or more, helicopter system)
?Receiver(7-channel or more)
?6S Li-Po 2600 ~ 3300mAh (3300mAh idea)
?Digital Pitch Gauge