Align T-REX 500X Super Combo

Experienced in numerous of innovations, the brand name new T-REX 500X is now all set to go. More attractive and creative style concepts are all in here, it definitely would be your favorite T-REX 500X design ever.

Refresh and fine-tune, T-REX 500X adjust with brand name new FL rotor head system, utilizes an extremely low CG style which lowers resistance during 3D maneuvers while increasing flight responsiveness and accuracy. A progressive style includes a gloss silver and red anodizing look which continue our quality development based upon our 700 class helicopter. The T-REX 500X primary frame utilizes composite product integration technology on carbon side frame plates, including the addition of battery installing side rails, and a leading motor mount style. Ingenious adjustable belt guide wheel, enables a practical way to adjust the belt stress by launching or tightening up the screw. The screw is utilized to keep optimum belt stress gradually to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to enhance crashworthiness.

T-REX 500X utilizes 470mm primary blades and 520MX(1600KV/3527) motor with 20% power upgrades than the initial 1600KV/3225 motor. The current new RCE-BL80X Brushless ESC support double BEC output from 6 ~ 8.4V offering effective and remarkable power. The NEW DS530M/DS535M digital servos are with extreme torque and speed action permit to support faster, more exact and accurate flight performance.

Equipped with all the leading end electronic gadgets, T-REX 500X is as steady and effective like the big scale helicopters. It is about to re-define the 500-class helicopters in your mind.

New extended 470mm primary blades for T-REX 500X efficiently enhance the flying stability and power efficiency. Enhance the power for better control permit to enjoy T-REX 500X flights same like other large size helicopters.

New 78 size tail blades are longer in length and deal remarkable and exact tail holding efficiency, even during requiring 3D flight.

The brand name new low CG 500FL Flybarless Rotor Head System utilizes the accuracy grinding of high-carbon steel hollow shaft efficiently increase its concentricity. Enable to reduce resistance during 3D maneuvers, increased flight responsiveness and accuracy. In addition, the styling look consistency with red anodized and stainless color, draw out the high quality much like 700 size 3D helicopter.

New Swashplate style with exact bearings functions in absolutely no slop delivering an exact and accurate regulated flight.

New 520MX(1600KV/3527) motor features high efficiency, remarkable power, outstanding torque, low current draw, and a low operating temperature level. Enable to provide keeping consistent torque and head speed through constant 3D maneuvers.

Brand new CNC metal reinforcement plate and brace compare to frame installing bolt efficiently increase the torsional stength of primary frame, under extreme 3D maneuver, you can highly feel its strong reinforcement from its structure. In addition, the styling look consistency with red anodized and stainless color draw out the high tactile appeal.
Carbon fiber side frame plates are manufactured using a proprietary composite product integration technology which incorporates the battery installing rails into the frame. This distinct usage of open areas within the frame produces a rigid frame and is aesthetically pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

RCE-BL80X is specially created for T-REX 500X offering higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based upon servo specification.

Brand new latching battery tray which utilizes incorporated installing rails inside the frames to simplify insertion / removal of battery while offering security for the battery.

DS530 HV Cyclic and DS535 HV Rudder servos support as much as 8.4V for remarkable responsiveness, extreme torque, and improved performance.

Innovative adjustable belt guide wheel, enables a practical way to adjust the belt stress by launching or tightening up the screw. The screw is utilized to keep optimum belt stress over time.
Brand New Belt Drive Assembly style permit quiet operation and low expense on serviceability.

Ultilize of reinforce primary gear case functions in using larger bearing has a higher load carry capacity which lowers the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The new primary gear case and all-metal central wheel transmission system is an effective style to deliver the ultimate performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

A 19mm wide Tail Boom to enhances the torsional strength.
Carbon Fiber Tail Control Rod is practical and enhances the helicopters tail control.

The freshly created double point supported tail control assembly delivers slop complimentary efficiency while improving rudder resolution and precision.

The new tail rotor holder style includes thrust bearings which increases durability, along with considerably improving the accuracy and efficiency of the tail efficiency when using 78 size Tail Blades.

Standard devices

.Microbeast PLUS Flybarless System x 1 set
.RCE-BL80X Brushless ESC x 1
.520MX Brushless Motor(1600KV/3527) x 1
.DS530 Digital servo x 3
.DS535 Digital servo x 1

Specification

.Length: 935mm
.Height: 259mm
.Width: 151mm
.Main Blade Length: 470mm
.Main Rotor Diameter: 1054mm
.Tail Rotor Diameter: 219mm
.Motor Pinion Gear: 12T
.Main Drive Gear: 134T
.Main Drive Pulley: 80T
.Tail Drive Gear: 21T
.Drive Gear Ratio: 11.17:1:3.81
.Weight(w/o battery): approx. 1400gAccessories

.T-REX 500X KIT Set x 1 
.Microbeast PLUS Flybarless System x 1 set
.470 Carbon Fiber Blades x 1
.78 Tail Rotor Blade x 1
.520MX Brushless Motor(1600KV/3527) x 1
.DS530 Digital servo x 3
.DS535 Digital servo x 1 
.RCE-BL80X Brushless ESC x 1

Radio transmitter and electronic devices needed for assembly:
.Transmitter(6-channel or more, helicopter system)
.Receiver(6-channel or more)
.6S Li-Po 2600 ~ 3300mAh (3300mAh suggestion)
.Digital Pitch Gauge