Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combination Helicopter Package. This extraordinary package consists of not just the T-REX 500 PRO Package, however likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the fantastic 3GX Programmable Flybarless System. This very combination provides you with an amazing helicopter package and a similarly remarkable electronic package all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is geared up with an incredibly low CG design to efficiently reduce wind resistance during flight and offer the most direct and exact control feel back to the pilot, providing exciting 3D efficiency and inconceivable flight speed.
A uniquely carbon composite innovation efficiently strengthen the weak locations and offers simplified electronic devices installation.
The servos can be mounted directly onto the frame without mounting nuts.
The rear servo is mounted in-frame for a central design and optimal 3D efficiency.
MX series high effectiveness brushless motor consisted of with heatsink style case and ingrained fan to dramatically enhance cooling and increase power output.
Special quick release gyro and receiver mount design for quick elimination and strong attachment.
High precision slant tooth (helical) primary gear for greater load sustainability and lower noise output.
Upgraded tail gear box with greater material quality and easy maintenance.
High quality tail transmission design, integrated with upgraded double point mounted tail pitch control assembly to decrease slop and increase rudder control precision.
Extremely effective shaft driven tail system which efficiently reduce power loss found on belt driven systems. This likewise increases efficiency during flight.
Upgraded 4mm carbon rudder control rod and metal rudder pitch bell crank to more enhance the rudder locking impact and controllability.
Upgraded style battery mounting platform to strengthen the frame along with to offer a mount for the electronic speed controller.
Upgraded lower CG landing gear style.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.
Finest tail gear ratio to decrease vibrations triggered by the high speed operations of the primary blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Upgraded 3GX represents the next generation of multi function flybarless systems. The dramatically improved efficiency will develop an instant influence on any lovers.
The 3GX is presently the tiniest and lightest flybarless system on the market and includes two ports to directly link Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions utilizing the computer system setup software application directs the user through a step by step setup procedure, enabling fast setups without omitting any actions.
With the soon to be launched Bluetooth connection package, the 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are readily available to offer the ideal feel for newbie and advanced pilots.
Custom-made criteria have been developed to enable pilots to fine tune many swashplate and rudder settings and a settings export function allows customized settings to be shared amongst buddies.
The 3GX includes the greatest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The double axis plus rudder sensing unit dramatically enhances swashplate and rudder correction precision and will be felt when hovering, along with during aerobatic routines.
Appropriate for 200 to 700 class helicopters, radiance engine or electric powered.
The vibration resistant qualities are evident even when mounted with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to entirely re-written firmware. The result is a significant enhancement in stability that measures up to a flybarred helicopter, while providing explosive agility.
With an integrated in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily performed with precision.
Rudder control is similar to the luxury GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder action qualities, allowing consistent rudder feel even under high speed conditions. This outstanding control feel will enable pilots of all skill levels to experience the ideal integration in between the 3GX and the helicopter.
Extra peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensors, make sure positioning of the helicopter with superior accuracy and providing the ultimate option for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Size: 978mm

Tail Rotor Size: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V 

Consists of: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Load 2600 ~ 4600mAh (3300mAh suggested)
Digital Pitch Gauge