Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This incredible plan includes not just the T-REX 500 PRO Package, however likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, three DS515M cyclic servos, one DS525M tail servo and finally the incredible 3GX Programmable Flybarless System. This extremely combo provides you with an unbelievable helicopter kit and a similarly remarkable electronic plan all in one box.

T-REX 500 PRO Includes: The Align 500 PRO DFC helicopter is equipped with an exceptionally low CG design to effectively minimize wind resistance during flight and supply the most direct and accurate control feel back to the pilot, providing exciting 3D efficiency and unthinkable flight speed.
A uniquely carbon composite innovation effectively enhance the weak locations and provides streamlined electronic devices setup.
The servos can be mounted directly onto the frame without installing nuts.
The rear servo is mounted in-frame for a central design and ideal 3D efficiency.
MX series high effectiveness brushless motor consisted of with heatsink design housing and embedded fan to drastically enhance cooling and boost power output.
Unique quick release gyro and receiver install design for quick elimination and tough attachment.
High precision slant tooth (helical) primary equipment for greater load sustainability and lower sound output.
Revamped tail transmission with greater material quality and simple maintenance.
High quality tail transmission design, integrated with upgraded double point mounted tail pitch control assembly to lessen slop and boost rudder control precision.
Extremely efficient shaft driven tail system which effectively minimize power loss found on belt driven systems. This likewise increases efficiency during flight.
Revamped 4mm carbon rudder control rod and metal rudder pitch bell crank to further enhance the rudder locking result and controllability.
Revamped design battery installing platform to enhance the frame as well as to supply an install for the electronic speed controller.
Revamped lower CG landing equipment design.
Styled aerodynamically canopy for the supreme fit, making the helicopter stick out.
Best tail equipment ratio to lessen vibrations brought on by the high speed operations of the primary blades, bringing the best tail locking power.

3GX Programmable Flybarless System Includes:

Revamped 3GX represents the next generation of multi function flybarless systems. The drastically enhanced efficiency will produce an instant influence on any lovers.
The 3GX is currently the smallest and lightest flybarless system on the market and features 2 ports to directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions utilizing the computer system setup software application directs the user as a result of an action by action setup procedure, permitting quick setups without omitting any actions.
With the soon to be released Bluetooth connection kit, the 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to achieve the most ideal setup for their helicopter without the uncertainty.
Three levels of flight mode are readily available to supply the ideal feel for beginner and advanced pilots.
Custom-made specifications have been developed to permit pilots to fine tune various swashplate and rudder settings and a settings export feature permits custom settings to be shared among buddies.
The 3GX features the greatest spec gyroscope sensors, allowing it to be used in the harshest conditions. The double axis plus rudder sensor drastically enhances swashplate and rudder correction precision and will be felt when hovering, as well as during aerobatic regimens.
Suitable for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant attributes appear even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The outcome is a significant improvement in stability that equals a flybarred helicopter, while providing explosive agility.
With a built in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control resembles the high-end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder action attributes, allowing consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all ability levels to experience the ideal integration between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes a total of 10 sensors, make sure positioning of the helicopter with exceptional accuracy and providing the supreme option for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Load 2600 ~ 4600mAh (3300mAh advised)
Digital Pitch Gauge