Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This incredible package consists of not only the T-REX 500 PRO Package, but likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the amazing 3GX Programmable Flybarless System. This extremely combination supplies you with an incredible helicopter package and a similarly excellent electronic package all in one box.

T-REX 500 PRO Includes: The Align 500 PRO DFC helicopter is equipped with an extremely low CG design to effectively reduce wind resistance throughout flight and offer the most direct and precise control feel back to the pilot, offering thrilling 3D performance and unthinkable flight speed.
A uniquely carbon composite technology effectively enhance the weak areas and offers streamlined electronic devices setup.
The servos can be installed straight onto the frame without mounting nuts.
The rear servo is installed in-frame for a centralized design and optimal 3D performance.
MX series high effectiveness brushless motor consisted of with heatsink style case and ingrained fan to considerably enhance cooling and boost power output.
Distinct fast release gyro and receiver mount design for fast removal and sturdy attachment.
High accuracy slant tooth (helical) main equipment for higher load sustainability and lower sound output.
Redesigned tail transmission with higher material quality and simple maintenance.
High quality tail transmission design, combined with updated double point installed tail pitch control assembly to minimize slop and boost rudder control accuracy.
Highly effective shaft driven tail system which effectively reduce power loss found on belt driven systems. This likewise increases performance throughout flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to more enhance the rudder locking impact and controllability.
Redesigned style battery mounting platform to enhance the frame as well as to offer a mount for the electronic speed controller.
Redesigned lower CG landing equipment style.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.
Best tail equipment ratio to minimize vibrations caused by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Includes:

Redesigned 3GX represents the next generation of multi function flybarless systems. The considerably improved performance will produce an immediate effect on any lovers.
The 3GX is presently the smallest and lightest flybarless system on the market and includes two ports to straight connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions using the computer system setup software application directs the user as a result of an action by action setup procedure, enabling quick setups without omitting any steps.
With the quickly to be released Bluetooth connectivity package, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are available to offer the perfect feel for newbie and advanced pilots.
Customized parameters have been developed to allow pilots to tweak many swashplate and rudder settings and a settings export function permits customized settings to be shared among pals.
The 3GX includes the greatest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The double axis plus rudder sensing unit considerably improves swashplate and rudder correction accuracy and will be felt when hovering, as well as throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant attributes are evident even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, along with entirely re-written firmware. The outcome is a dramatic improvement in stability that measures up to a flybarred helicopter, while offering explosive dexterity.
With an integrated in pirouette payment function, the 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily performed with accuracy.
Rudder control resembles the high end GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder reaction attributes, allowing consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilots of all skill levels to experience the perfect combination in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system uses a total of 10 sensors, guarantee positioning of the helicopter with exceptional accuracy and offering the ultimate option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Pack 2600 ~ 4600mAh (3300mAh recommended)
Digital Pitch Gauge