Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Kit. This unbelievable plan consists of not just the T-REX 500 PRO Kit, however likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the remarkable 3GX Programmable Flybarless System. This extremely combination supplies you with an incredible helicopter set and a similarly excellent electronic plan all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is geared up with an incredibly low CG design to effectively lower wind resistance during flight and offer the most direct and exact control feel back to the pilot, offering thrilling 3D performance and unthinkable flight speed.
A uniquely carbon composite innovation effectively enhance the weak locations and offers simplified electronic devices setup.
The servos can be mounted directly onto the frame without installing nuts.
The rear servo is mounted in-frame for a central design and optimum 3D performance.
MX series high efficiency brushless motor consisted of with heatsink design case and embedded fan to considerably improve cooling and increase power output.
Distinct quick release gyro and receiver install design for quick removal and sturdy accessory.
High accuracy slant tooth (helical) main gear for greater load sustainability and lower noise output.
Revamped tail gear box with greater material quality and simple maintenance.
High quality tail gearbox design, combined with updated double point mounted tail pitch control assembly to reduce slop and increase rudder control accuracy.
Extremely effective shaft driven tail system which effectively lower power loss found on belt driven systems. This likewise increases performance during flight.
Revamped 4mm carbon rudder control rod and metal rudder pitch bell crank to additional improve the rudder locking effect and controllability.
Revamped design battery installing platform to enhance the frame along with to offer an install for the electronic speed controller.
Revamped lower CG landing gear design.
Styled aerodynamically canopy for the ultimate fit, making the helicopter stick out.
Best tail gear ratio to reduce vibrations triggered by the high speed operations of the main blades, bringing the very best tail locking power.

3GX Programmable Flybarless System Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The considerably enhanced performance will develop an instant effect on any lovers.
The 3GX is currently the smallest and lightest flybarless system on the market and features 2 ports to directly connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions using the computer system setup software directs the user as a result of a step by action setup process, allowing for quick setups without omitting any steps.
With the quickly to be launched Bluetooth connectivity set, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, allowing pilots to achieve the most optimum setup for their helicopter without the uncertainty.
Three levels of flight mode are offered to offer the best feel for beginner and advanced pilots.
Custom specifications have been developed to permit pilots to tweak various swashplate and rudder settings and a settings export function permits custom-made settings to be shared amongst good friends.
The 3GX features the greatest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The double axis plus rudder sensing unit considerably enhances swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic regimens.
Appropriate for 200 to 700 class helicopters, radiance engine or electrical powered.
The vibration resistant qualities are evident even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, along with completely re-written firmware. The result is a significant enhancement in stability that rivals a flybarred helicopter, while offering explosive dexterity.
With a built in pirouette compensation function, the 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
Rudder control is similar to the high-end GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder reaction qualities, allowing consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all skill levels to experience the best combination in between the 3GX and the helicopter.
Extra peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system utilizes an overall of 10 sensors, guarantee positioning of the helicopter with exceptional accuracy and offering the ultimate solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Gear: 12T

Main Drive Gear: 134T

Autorotation Tail Drive Gear: 145T

Tail Drive Gear: 36T

Drive Gear Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Kit
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Needed to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S LiPo Battery Load 2600 ~ 4600mAh (3300mAh suggested)
Digital Pitch Gauge