Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combination Helicopter Set. This extraordinary package includes not just the T-REX 500 PRO Set, however also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and finally the amazing 3GX Programmable Flybarless System. This extremely combination provides you with an amazing helicopter package and a similarly excellent electronic package all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is equipped with a very low CG design to successfully lower wind resistance during flight and offer the most direct and exact control feel back to the pilot, providing exhilarating 3D performance and unimaginable flight speed.
A uniquely carbon composite technology successfully strengthen the weak locations and offers streamlined electronic devices setup.
The servos can be installed straight onto the frame without installing nuts.
The rear servo is installed in-frame for a central design and optimal 3D performance.
MX series high efficiency brushless motor consisted of with heatsink design casing and embedded fan to drastically enhance cooling and boost power output.
Unique quick release gyro and receiver mount design for quick elimination and sturdy accessory.
High accuracy slant tooth (helical) main equipment for greater load sustainability and lower sound output.
Upgraded tail transmission with greater material quality and simple maintenance.
High quality tail transmission design, combined with updated double point installed tail pitch control assembly to lessen slop and boost rudder control accuracy.
Highly efficient shaft driven tail system which successfully lower power loss found on belt driven systems. This also increases performance during flight.
Upgraded 4mm carbon rudder control rod and metal rudder pitch bell crank to more enhance the rudder locking result and controllability.
Upgraded design battery installing platform to strengthen the frame as well as to offer a mount for the electronic speed controller.
Upgraded lower CG landing equipment design.
Styled aerodynamically canopy for the supreme fit, making the helicopter stand apart.
Finest tail equipment ratio to lessen vibrations triggered by the high speed operations of the main blades, bringing the best tail locking power.

3GX Programmable Flybarless System Features:

Upgraded 3GX represents the next generation of multi function flybarless systems. The drastically enhanced performance will develop an immediate influence on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and features 2 ports to straight connect Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup simply in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions using the computer system setup software application directs the user through an action by action setup process, enabling fast setups without leaving out any steps.
With the soon to be launched Bluetooth connectivity package, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to accomplish the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to offer the perfect feel for novice and advanced pilots.
Custom parameters have been established to permit pilots to tweak various swashplate and rudder settings and a settings export function permits custom-made settings to be shared among good friends.
The 3GX features the highest spec gyroscope sensing units, enabling it to be used in the harshest conditions. The double axis plus rudder sensor drastically improves swashplate and rudder correction accuracy and will be felt when hovering, as well as during aerobatic regimens.
Ideal for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant qualities appear even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to totally re-written firmware. The outcome is a significant enhancement in stability that matches a flybarred helicopter, while providing explosive dexterity.
With an integrated in pirouette payment function, the 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with accuracy.
Rudder control resembles the luxury GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder reaction qualities, enabling constant rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all ability levels to experience the perfect combination in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensing units, make sure positioning of the helicopter with remarkable accuracy and providing the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognition

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Gear: 12T

Main Drive Gear: 134T

Autorotation Tail Drive Gear: 145T

Tail Drive Gear: 36T

Drive Gear Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Consists of: (1) T-REX 500 PRO DFC Set
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Pack 2600 ~ 4600mAh (3300mAh suggested)
Digital Pitch Gauge