Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combo Helicopter Package. This amazing package consists of not only the T-REX 500 PRO Package, but likewise a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, 3 DS515M cyclic servos, one DS525M tail servo and lastly the fantastic 3GX Programmable Flybarless System. This super combination offers you with an unbelievable helicopter package and an equally impressive electronic package all in one box.

T-REX 500 PRO Includes: The Align 500 PRO DFC helicopter is equipped with a very low CG design to efficiently minimize wind resistance during flight and offer the most direct and exact control feel back to the pilot, offering exciting 3D efficiency and unimaginable flight speed.
A uniquely carbon composite innovation efficiently strengthen the weak locations and provides simplified electronic devices setup.
The servos can be installed straight onto the frame without mounting nuts.
The rear servo is installed in-frame for a centralized design and optimal 3D efficiency.
MX series high efficiency brushless motor consisted of with heatsink design casing and embedded fan to drastically enhance cooling and increase power output.
Special quick release gyro and receiver install design for quick elimination and sturdy attachment.
High accuracy slant tooth (helical) primary equipment for greater load sustainability and lower sound output.
Redesigned tail gear box with greater material quality and easy maintenance.
High quality tail gearbox design, integrated with updated double point installed tail pitch control assembly to decrease slop and increase rudder control accuracy.
Highly effective shaft driven tail system which efficiently minimize power loss discovered on belt driven systems. This likewise increases efficiency during flight.
Redesigned 4mm carbon rudder control rod and metal rudder pitch bell crank to additional enhance the rudder locking result and controllability.
Redesigned design battery mounting platform to strengthen the frame along with to offer an install for the electronic speed controller.
Redesigned lower CG landing equipment design.
Styled aerodynamically canopy for the supreme fit, making the helicopter stand out.
Best tail equipment ratio to decrease vibrations brought on by the high speed operations of the primary blades, bringing the best tail locking power.

3GX Programmable Flybarless System Includes:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will develop an instant effect on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and includes 2 ports to straight connect Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions using the computer setup software application directs the user as a result of an action by action setup process, permitting quick setups without leaving out any steps.
With the quickly to be launched Bluetooth connectivity package, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to accomplish the most optimal setup for their helicopter without the guesswork.
3 levels of flight mode are available to offer the ideal feel for newbie and advanced pilots.
Customized parameters have actually been established to enable pilots to fine tune various swashplate and rudder settings and a settings export feature allows customized settings to be shared among good friends.
The 3GX includes the greatest spec gyroscope sensing units, enabling it to be used in the harshest conditions. The double axis plus rudder sensing unit drastically enhances swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic regimens.
Suitable for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant attributes are evident even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to entirely re-written firmware. The result is a remarkable enhancement in stability that rivals a flybarred helicopter, while offering explosive dexterity.
With an integrated in pirouette payment function, the 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
Rudder control is similar to the high end GP-780 gyro in that the rudder sensitivity is optimized for the helicopter's rudder response attributes, enabling constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the ideal integration in between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensing units, guarantee positioning of the helicopter with superior accuracy and offering the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Diameter: 978mm

Tail Rotor Diameter: 206mm

Motor Drive Gear: 12T

Main Drive Gear: 134T

Autorotation Tail Drive Gear: 145T

Tail Drive Gear: 36T

Drive Gear Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Consists of: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Complete:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Load 2600 ~ 4600mAh (3300mAh suggested)
Digital Pitch Gauge