Align T-REX 500 PRO DFC Super Combo Helicoper Kit w/Motor, ESC, 4 Ser

This is the Align T-REX 500 PRO DFC Flybarless Super Combination Helicopter Package. This extraordinary bundle includes not only the T-REX 500 PRO Package, however also a 425 3G Carbon Fiber blade set, a 500MX Brushless motor, a RCE-BL70G Brushless Electronic Speed Controller, three DS515M cyclic servos, one DS525M tail servo and finally the fantastic 3GX Programmable Flybarless System. This very combination supplies you with an amazing helicopter package and a similarly outstanding electronic bundle all in one box.

T-REX 500 PRO Features: The Align 500 PRO DFC helicopter is equipped with an exceptionally low CG design to efficiently reduce wind resistance throughout flight and supply the most direct and exact control feel back to the pilot, providing exciting 3D performance and unthinkable flight speed.
A uniquely carbon composite technology efficiently enhance the weak locations and offers streamlined electronic devices installation.
The servos can be mounted straight onto the frame without mounting nuts.
The rear servo is mounted in-frame for a central design and ideal 3D performance.
MX series high efficiency brushless motor included with heatsink design housing and embedded fan to considerably improve cooling and increase power output.
Special fast release gyro and receiver install design for fast removal and sturdy attachment.
High accuracy slant tooth (helical) main equipment for higher load sustainability and lower sound output.
Upgraded tail transmission with higher material quality and simple upkeep.
High quality tail gearbox design, integrated with updated double point mounted tail pitch control assembly to minimize slop and increase rudder control accuracy.
Extremely efficient shaft driven tail system which efficiently reduce power loss discovered on belt driven systems. This also increases performance throughout flight.
Upgraded 4mm carbon rudder control rod and metal rudder pitch bell crank to more improve the rudder locking effect and controllability.
Upgraded design battery mounting platform to enhance the frame along with to supply an install for the electronic speed controller.
Upgraded lower CG landing equipment design.
Styled aerodynamically canopy for the supreme fit, making the helicopter stand apart.
Finest tail equipment ratio to minimize vibrations caused by the high speed operations of the main blades, bringing the very best tail locking power.

3GX Programmable Flybarless System Features:

Upgraded 3GX represents the next generation of multi function flybarless systems. The considerably enhanced performance will produce an instant impact on any enthusiasts.
The 3GX is presently the tiniest and lightest flybarless system on the market and includes two ports to straight connect Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions using the computer system setup software application directs the user through an action by step setup procedure, allowing for fast setups without omitting any steps.
With the quickly to be released Bluetooth connection package, the 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to accomplish the most ideal setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to supply the perfect feel for novice and advanced pilots.
Custom-made criteria have actually been developed to allow pilots to tweak numerous swashplate and rudder settings and a settings export function enables custom-made settings to be shared amongst friends.
The 3GX includes the highest spec gyroscope sensing units, allowing it to be utilized in the harshest conditions. The double axis plus rudder sensing unit considerably improves swashplate and rudder correction accuracy and will be felt when hovering, along with throughout aerobatic routines.
Appropriate for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant qualities are evident even when mounted with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The result is a remarkable enhancement in stability that matches a flybarred helicopter, while providing explosive agility.
With a built in pirouette compensation function, the 3GX has the ability to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
Rudder control is similar to the high-end GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder response qualities, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilots of all ability levels to experience the perfect combination between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system utilizes an overall of 10 sensing units, ensure positioning of the helicopter with remarkable accuracy and providing the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 500 PRO Specifications:

Length: 868mm

Height: 275mm

Main Blade Length: 425mm

Main Rotor Size: 978mm

Tail Rotor Size: 206mm

Motor Drive Equipment: 12T

Main Drive Equipment: 134T

Autorotation Tail Drive Equipment: 145T

Tail Drive Equipment: 36T

Drive Equipment Ratio: 1:11.17:4.03

Weight (With Motor): 1210g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V 

Includes: (1) T-REX 500 PRO DFC Package
(1) 3GX Flybarless System


(1) 425 3G Carbon Fiber blades


(1) 500MX Brushless Motor (1600kV)
(3) DS515M Digital servo


(1) DS525M Digital servo


(1) RCE-BL70G Brushless ESC 

Required to Total:


Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX LiPo Battery Pack 2600 ~ 4600mAh (3300mAh advised)
Digital Pitch Gauge