Align T-Rex 500 Airwolf Scale Fuselage (Black)

This is the optional Airwolf Scale Fuselage from Align created for the T-Rex 500 Helicopter. This fuselage is highly detailed with many features including completely retractable landing gear and practical military devices. The retractable landing gear design needs only a single servo to pull back all three of the landing equipments so it is basic, reputable and easy to install. The non screw canopy cover design allows for practical gain access to for switching out batteries in between flights and maintenance. The body likewise features 3K carbon enhanced ribs for increased fuselage strength.

Specificatons:

Body length: 1000mm

Body width:  380mm

Body height: 310mm
Consisted of accesories: 1 - Fuselage

1 - Vertical stabilizer (B)

2 - Vertical stabilizer (S)

1 - Tail system cover

2 - Stabilizers

2 - Machine gun mounts

2 - Gatling gun

1 - Rocket gun

3 - Aluminum alloy retract mounts

1 - Machine gun supporting tube

4 - Wheel control arms

2 - Front landing skid mounts

1 - Front wheel

2 - Back wheels

2 - Fuselage Frames

1 - Servo mount

3 - Carbon fiber rods (4x88mm)

2 - Carbon fiber rods (3x45mm)

1 - Vertical stabilizer assistance arms

4 - Carbon rod nuts (4x9x5.5mm)

11 - Set screws (M3x4mm)

11 -Self-tapping screws (T1.7x5mm)

2 - Washer self tapping screws (T2x5mm)

2 - Washer self tapping screws (T2x12mm)

2 - Washer self tapping screws (T2x10mm)

4 - Screws (M2x20mm)

4 - Screws (M3x10mm)

4 - M3 nuts

4 - Washers (4.3x9x0.8mm)

1 - Linkage ball A(M2x3.5) (4.75x8.18mm)

5 - Linkage balls A(T2.6x3.5) (4.75x8.18mm)

6 - Ball links (Black)

1 - Stainless-steel linkage rod 1(2x92mm)

2 - Stainless-steel linkage rods (2x286mm)

4 - Washers (2x6x0.6mm)

2 - Washers (2.6x5.8x0.6mm)

1 - M2 hex nut