Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which presented an innovative style and came geared up with high-end electronic equipment. Align's a lot of anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or an expert, the brand name brand-new T-REX 470L will give you the brand-new flying feel once again.

470EFL Main Rotor Head provides exceptional flight stability and provides a lower CG style to lower flying resistance while supplying a more stiff and fast rotor head action. To enhance the strength and resilience of the main and feathering shaft the 470 main shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high standard 1.2mm 3K carbon fiber main frame and a larger body style which increases the size of the battery compartment enabling the usage of bigger capability battery. The 470L uses a high effective belt drive assembly style with an innovative adjustable belt guide wheel, supplying a hassle-free way to change the belt tension by launching or tightening up the screw. This screw is used to preserve optimal belt tension improving the life of the belt and reducing keeps costs. The landing skid is slanted 5 degrees forward to enhance crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is geared up with the large external diameter 470MX motor(1800KV/2818) which is highly effective supplying exceptional power, outstanding torque, enhanced existing draw, and a lower operating temperature level which are outstanding enhancements as compared to the 460MX motor. The brand name brand-new DS450 digital cyclic servos and DS455 digital tail servo, support approximately V8.4, high voltage input, improving the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo spec. The brand-new high-end electronic devices efficiently boost flight performance.

Extended 380mm main blades efficiently enhance the flying stability and power performance. The brand-new crafted airfoil style efficiently decreases turbulence at the end of the main blades,this conserves power consumption during severe 3D flight. New 69 size tail blades are longer in length and offer exceptional tail holding performance, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head provides exceptional flight stability and provides a lower CG style to lower flying resistance while supplying a more stiff and fast rotor head action. Brand Name New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,efficiently enhancing the Main and Feathering Shaft while improving durability.

New 470MX motor features; high efficiency, exceptional power, outstanding torque, low existing draw, and a low operating temperature level. The 470MX is capable of keeping constant torque and head speed through constant 3D maneuvers. 470MX motor is created for 3D flight.

New Swashplate style with absolutely no slop delivering an exact and precise controlled flight.

>Produced using the most recent composite innovation to embed brass inserts into main shaft bearing block, which boost the structure integrety and strength. You can feel the solid structure even in severe 3D flight.

Carbon fiber side frame plates are produced using an exclusive composite material combination innovation which incorporates the battery installing rails into the frame. This special usage of open areas within the frame produces a rigid frame and is visually pleasing.

An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

Brand brand-new latching battery tray which uses integrated installing rails inside the frames to streamline insertion / removal of battery while supplying security for the battery.

Specially created for T-REX 470 supplying higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support approximately 8.4V for exceptional responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide wheel, permits a hassle-free way to change the belt tension by launching or tightening up the screw. The screw is used to preserve optimal belt tension over time.

The One Way Bearing is produced using bearing take and after heat treatment the hardness is HRC50-55. This bigger bearing has a greater load carry capability which decreases the loss of momentum and enhances the fficiency, speed, and smoothness of the main rotor. The brand-new main equipment case and all-metal central wheel transmission system is an effective style to deliver the supreme performance.

Landing skid is slanted 5 degrees forward to enhance crashworthiness.

Newly created vertical tail servo mount to enhance CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength.

Designed using an exclusive material combination innovation which produces a unique appearance and enhances the Vertical Stabilizer's stiffness.

The recently created dual point supported tail control assembly delivers slop totally free performance while improving rudder resolution and precision.

The brand-new tail rotor holder style consists of thrust bearings which increases resilience, as well as considerably improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

 Basic equipment

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Spec:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Diameter: 850mm
.Tail Rotor Diameter: 181mm
.Motor Pinion Equipment: 11T
.Main Drive Equipment: 121T
.Main Drive Pulley: 56T
.Tail Drive Equipment: 15T
.Drive Equipment Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L DOMINATOR Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1