Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which presented an ingenious style and came equipped with high-end electronic equipment. Align's the majority of prepared for helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or a professional, the brand name new T-REX 470L will offer you the new flying feel once again.

470EFL Main Rotor Head provides remarkable flight stability and offers a lower CG style to reduce flying resistance while providing a more stiff and quick rotor head response. To improve the strength and resilience of the main and feathering shaft the 470 main shaft outer dimension was increased from Ø5mm to Ø6mm, while the feathering shaft outer dimension was increased from Ø4mm to Ø5mm. The 470L has embrace a high standard 1.2mm 3K carbon fiber main frame and a larger body style which increases the size of the battery compartment allowing the use of larger capability battery. The 470L uses a high efficient belt drive assembly style with an ingenious adjustable belt guide pulley, providing a convenient method to change the belt stress by launching or tightening up the screw. This screw is used to keep optimum belt stress enhancing the life of the belt and reducing preserves expenses. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor(1800KV/2818) which is highly efficient providing remarkable power, outstanding torque, enhanced current draw, and a lower operating temperature which are outstanding enhancements as compared to the 460MX motor. The brand name new DS450 digital cyclic servos and DS455 digital tail servo, support as much as V8.4, high voltage input, enhancing the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based upon servo specification. The new high-end electronic devices effectively improve flight performance.

Extended 380mm main blades effectively improve the flying stability and power efficiency. The new engineered airfoil style effectively lowers turbulence at the end of the main blades,this saves power consumption during severe 3D flight. New 69 size tail blades are longer in length and offer remarkable tail holding efficiency, even during demanding 3D flight.

Brand New 470EFL Main Rotor Head provides remarkable flight stability and offers a lower CG style to reduce flying resistance while providing a more stiff and quick rotor head response. Brand Name New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft outer dimension increased from Ø4mm to Ø5mm,effectively strengthening the Main and Feathering Shaft while enhancing durability.

New 470MX motor functions; high effectiveness, remarkable power, outstanding torque, low current draw, and a low operating temperature. The 470MX can maintaining constant torque and head speed through continuous 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate style with zero slop delivering a precise and precise regulated flight.

>Manufactured using the latest composite technology to embed brass inserts into main shaft bearing block, which improve the structure integrety and strength. You can feel the solid structure even in severe 3D flight.

Carbon fiber side frame plates are produced using a proprietary composite material integration technology which incorporates the battery installing rails into the frame. This distinct use of open spaces within the frame produces a stiff frame and is aesthetically pleasing.

An extra 3rd main shaft bearing block increases the strength of the main frame while enhancing 3D flight.

Brand new locking battery tray which uses incorporated installing rails inside the frames to streamline insertion / elimination of battery while providing defense for the battery.

Specially designed for T-REX 470 providing greater currency output and assistance for high voltage servos with an internal BEC output from 5V to 8.4V which can be established based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support as much as 8.4V for remarkable responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide pulley, permits a convenient method to change the belt stress by launching or tightening up the screw. The screw is used to keep optimum belt stress over time.

The One Method Bearing is produced using bearing steal and after heat treatment the firmness is HRC50-55. This larger bearing has a greater load bring capability which lowers the loss of momentum and improves the fficiency, speed, and smoothness of the main rotor. The new main equipment case and all-metal main pulley transmission system is an efficient style to provide the supreme performance.

Landing skid is tilted 5 degrees forward to improve crashworthiness.

Newly designed vertical tail servo install to improve CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to improves the torsional strength.

Designed using a proprietary material integration technology which produces a unique appearance and improves the Vertical Stabilizer's stiffness.

The newly designed dual point supported tail control assembly delivers slop free efficiency while enhancing rudder resolution and precision.

The new tail rotor holder style consists of thrust bearings which increases resilience, along with substantially enhancing the precision and effectiveness of the tail efficiency when using 69 size Tail Blades.

 Basic equipment

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Spec:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Size: 850mm
.Tail Rotor Size: 181mm
.Motor Pinion Gear: 11T
.Main Drive Gear: 121T
.Main Drive Pulley: 56T
.Tail Drive Gear: 15T
.Drive Gear Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L DOMINATOR Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1