Align T-REX 470LP Super Combo

Following the release of the T-REX 450L, which presented an ingenious style and came equipped with high-end electronic devices. Align's most expected helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newbie or a professional, the brand brand-new T-REX 470L will give you the brand-new flying feel again.

470EFL Main Rotor Head offers superior flight stability and offers a lower CG style to reduce flying resistance while supplying a more stiff and quick rotor head action. To enhance the strength and resilience of the primary and feathering shaft the 470 primary shaft external measurement was increased from Ø5mm to Ø6mm, while the feathering shaft external measurement was increased from Ø4mm to Ø5mm. The 470L has embrace a high basic 1.2mm 3K carbon fiber primary frame and a wider body style which increases the size of the battery compartment permitting the use of larger capability battery. The 470L utilizes a high effective belt drive assembly style with an ingenious adjustable belt guide sheave, supplying a convenient way to change the belt stress by releasing or tightening the screw. This screw is used to keep optimal belt stress enhancing the life of the belt and lowering keeps costs. The landing skid is tilted 5 degrees forward to enhance crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large external size 470MX motor(1800KV/2818) which is extremely effective supplying superior power, exceptional torque, enhanced present draw, and a lower operating temperature which are exceptional improvements as compared to the 460MX motor. The brand brand-new DS450 digital cyclic servos and DS455 digital tail servo, support approximately V8.4, high voltage input, enhancing the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC offers 5.0V to 8.4V which can be set based on servo spec. The brand-new high-end electronics successfully boost flight performance.

Extended 380mm primary blades successfully enhance the flying stability and power performance. The brand-new engineered airfoil style successfully minimizes turbulence at the end of the primary blades,this conserves power usage throughout severe 3D flight. New 69 size tail blades are longer in length and deal superior tail holding performance, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head offers superior flight stability and offers a lower CG style to reduce flying resistance while supplying a more stiff and quick rotor head action. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft external measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft external measurement increased from Ø4mm to Ø5mm,successfully strengthening the Main and Feathering Shaft while enhancing durability.

New 470MX motor features; high performance, superior power, exceptional torque, low present draw, and a low operating temperature. The 470MX can keeping constant torque and head speed through constant 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate style with absolutely no slop providing an exact and accurate controlled flight.

>Manufactured utilizing the latest composite innovation to embed brass inserts into primary shaft bearing block, which boost the structure integrety and strength. You can feel the solid structure even in severe 3D flight.

Carbon fiber side frame plates are manufactured utilizing a proprietary composite product integration innovation which integrates the battery mounting rails into the frame. This unique use of open spaces within the frame creates a stiff frame and is visually pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while enhancing 3D flight.

Brand brand-new locking battery tray which utilizes incorporated mounting rails inside the frames to simplify insertion / elimination of battery while supplying defense for the battery.

Specially developed for T-REX 470 supplying higher currency output and assistance for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support approximately 8.4V for superior responsiveness, severe torque, and enhanced performance.

Innovative adjustable belt guide sheave, enables a convenient way to change the belt stress by releasing or tightening the screw. The screw is used to keep optimal belt stress over time.

The One Way Bearing is manufactured utilizing bearing take and after heat treatment the firmness is HRC50-55. This larger bearing has a greater load carry capability which minimizes the loss of momentum and enhances the fficiency, speed, and smoothness of the primary rotor. The brand-new primary equipment case and all-metal central sheave transmission system is an effective style to provide the ultimate performance.

Landing skid is tilted 5 degrees forward to enhance crashworthiness.

Newly developed vertical tail servo install to enhance CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to enhances the torsional strength.

Designed utilizing a proprietary product integration innovation which creates a unique appearance and enhances the Vertical Stabilizer's stiffness.

The newly developed dual point supported tail control assembly delivers slop totally free performance while enhancing rudder resolution and precision.

The brand-new tail rotor holder style includes thrust bearings which increases resilience, in addition to substantially enhancing the accuracy and performance of the tail performance when utilizing 69 size Tail Blades.

 Basic devices

.Microbeast PLUS Flybarless System X 1
.RCE-BL50X 50A Brushless ESC X 1
.470MX Brushless Motor(1800KV/2818) X 1
.DS450 Digital Servo X 3
.DS455 Digital Servo X 1

Requirements:
.Length: 755mm
.Height: 210mm
.Width: 108mm
.Main Blade Length: 380mm
.Main Rotor Size: 850mm
.Tail Rotor Size: 181mm
.Motor Pinion Gear: 11T
.Main Drive Gear: 121T
.Main Drive Sheave: 56T
.Tail Drive Gear: 15T
.Drive Gear Ratio: 11:1:3.73
.Weight(w/o battery): 840gAccessories

.T-REX 470L BOSS Set x 1
.380 Carbon Fiber Blades x 1set
.69 Tail Blade x 1set
.470MX Brushless Motor(1800KV/2818) x 1
.DS450 Digital Servo x 3
.DS455 Digital Servo x 1
.RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices needed for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1