Align T-REX 470LM KIT (w/ Motor and ESC)

Following the release of the T-REX 450L, which presented an innovative design and came geared up with high-end electronic devices. Align's most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand brand-new T-REX 470L will provide you the brand-new flying feel once again.

470EFL Main Rotor Head provides exceptional flight stability and provides a lower CG design to lower flying resistance while providing a more stiff and quick rotor head action. To improve the strength and resilience of the primary and feathering shaft the 470 primary shaft external measurement was increased from Ø5mm to Ø6mm, while the feathering shaft external measurement was increased from Ø4mm to Ø5mm. The 470L has adopt a high basic 1.2mm 3K carbon fiber primary frame and a broader body design which increases the size of the battery compartment permitting the use of bigger capability battery. The 470L utilizes a high effective belt drive assembly design with an innovative adjustable belt guide sheave, providing a practical way to change the belt tension by releasing or tightening the screw. This screw is used to preserve optimum belt tension improving the life of the belt and reducing keeps costs. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more progressive and dynamic.

The T-REX 470L is geared up with the large external diameter 470MX motor (1800KV) which is highly effective providing exceptional power, outstanding torque, enhanced existing draw, and a lower operating temperature level which are outstanding enhancements as compared with the 460MX motor.

Extended 380mm primary blades efficiently improve the flying stability and power performance. The brand-new engineered airfoil design efficiently lowers turbulence at the end of the primary blades,this saves power consumption throughout extreme 3D flight. New 69 size tail blades are longer in length and offer exceptional tail holding performance, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head provides exceptional flight stability and provides a lower CG design to lower flying resistance while providing a more stiff and quick rotor head action. Brand New 470 Main Shaft and Feathering Shaft: Main Shaft external measurement increased from Ø5mm to Ø6mm, while the Feathering Shaft external measurement increased from Ø4mm to Ø5mm,efficiently reinforcing the Main and Feathering Shaft while improving durability.

New 470MX motor functions; high efficiency, exceptional power, outstanding torque, low existing draw, and a low operating temperature level. The 470MX can maintaining consistent torque and head speed through constant 3D maneuvers. 470MX motor is designed for 3D flight.

New Swashplate design with zero slop delivering an accurate and precise regulated flight.

Brand brand-new CNC metal reinforcement plate and brace compare to frame installing bolt efficiently increase the torsional stength of primary frame, under extreme 3D maneuver, you can highly feel its solid reinforcement from its structure.

Carbon fiber side frame plates are made utilizing an exclusive composite product integration innovation which incorporates the battery installing rails into the frame. This distinct use of open areas within the frame produces a rigid frame and is visually pleasing.

An extra 3rd primary shaft bearing block increases the strength of the primary frame while improving 3D flight.

Brand brand-new locking battery tray which utilizes incorporated installing rails inside the frames to simplify insertion / elimination of battery while providing security for the battery.

Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based upon servo specification.

DS350M HV Cyclic and DS455 HV Rudder servos support as much as 8.4V for exceptional responsiveness, extreme torque, and enhanced performance.

Innovative adjustable belt guide sheave, enables a practical way to change the belt tension by releasing or tightening the screw. The screw is used to preserve optimum belt tension over time.

The One Way Bearing is made utilizing bearing take and after heat treatment the solidity is HRC50-55. This bigger bearing has a greater load carry capability which lowers the loss of momentum and improves the fficiency, speed, and smoothness of the primary rotor. The brand-new primary equipment case and all-metal central sheave transmission system is an efficient design to deliver the ultimate performance.

Landing skid is slanted 5 degrees forward to improve crashworthiness.

Newly designed vertical tail servo install to improve CG while increasing the responsiveness of 3D flight.

A larger Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is useful and improves the helicopters tail control.

Designed utilizing an exclusive product integration innovation which produces a unique look and improves the Vertical Stabilizer's stiffness.

The freshly designed dual point supported tail control assembly provides slop free performance while improving rudder resolution and precision.

The brand-new tail rotor holder design consists of thrust bearings which increases resilience, in addition to substantially improving the precision and efficiency of the tail performance when utilizing 69 size Tail Blades.

Standard devices

?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1

Specification

?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Size: 850mm
?Tail Rotor Size: 181mm
?Motor Pinion Gear: 11T
?Main Drive Gear: 121T
?Main Drive Wheel: 56T
?Tail Drive Gear: 15T
?Drive Gear Ratio: 11:1:3.73
?Weight(w/o battery): 860gAccessories

?T-REX 470L DOMINATOR Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1