Align T-REX 470LM Dominator Super Combo

Following the release of the T-REX 450L, which presented an innovative design and came geared up with high-end electronic devices. Align's the majority of expected helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or an expert, the brand brand-new T-REX 470L will give you the brand-new flying feel again.

470EFL Main Rotor Head supplies superior flight stability and provides a lower CG design to lower flying resistance while supplying a more stiff and fast rotor head response. To improve the strength and sturdiness of the primary and feathering shaft the 470 primary shaft external dimension was increased from Ø5mm to Ø6mm, while the feathering shaft external dimension was increased from Ø4mm to Ø5mm. The 470L has adopt a high basic 1.2mm 3K carbon fiber primary frame and a wider body design which increases the size of the battery compartment allowing the use of bigger capacity battery. The 470L uses a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, supplying a practical way to adjust the belt stress by releasing or tightening the screw. This screw is used to maintain ideal belt stress enhancing the life of the belt and decreasing keeps costs. The landing skid is slanted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is geared up with the big external size 470MX motor (1800KV) which is extremely efficient supplying superior power, excellent torque, enhanced current draw, and a lower operating temperature which are excellent enhancements as compared with the 460MX motor. The brand brand-new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, enhancing the servos torque and speed. The brand-new RCE-BL50X brushless ESC with an internal BEC supplies 5.0V to 8.4V which can be set based on servo spec. The brand-new high-end electronics effectively boost flight performance.

Extended 380mm primary blades effectively improve the flying stability and power efficiency. The brand-new crafted airfoil design effectively reduces turbulence at the end of the primary blades,this saves power intake throughout extreme 3D flight. New 69 size tail blades are longer in length and deal superior tail holding efficiency, even throughout requiring 3D flight.

Brand New 470EFL Main Rotor Head supplies superior flight stability and provides a lower CG design to lower flying resistance while supplying a more stiff and fast rotor head response. Brand name New 470 Main Shaft and Feathering Shaft: Main Shaft external dimension increased from Ø5mm to Ø6mm, while the Feathering Shaft external dimension increased from Ø4mm to Ø5mm,effectively enhancing the Main and Feathering Shaft while enhancing durability.

New 470MX motor features; high effectiveness, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX can preserving consistent torque and head speed through constant 3D maneuvers. 470MX motor is developed for 3D flight.

New Swashplate design with zero slop providing a precise and accurate regulated flight.

Brand brand-new CNC metal reinforcement plate and brace compare to frame installing bolt effectively increase the torsional stength of primary frame, under extreme 3D maneuver, you can strongly feel its strong reinforcement from its structure.

Carbon fiber side frame plates are made using a proprietary composite material integration innovation which integrates the battery installing rails into the frame. This special use of open spaces within the frame develops a stiff frame and is visually pleasing.

Specifications:
Microbeast PLUS Flybarless System X 1 set
?RCE-BL50X 50A Brushless ESC X 1
?470MX Brushless Motor(1800KV) X 1
?DS450M Digital Servo X 3
?DS455M Digital Servo X 1
RH47E01XW
?Length: 755mm
?Height: 210mm
?Width: 108mm
?Main Blade Length: 380mm
?Main Rotor Diameter: 850mm
?Tail Rotor Diameter: 181mm
?Motor Pinion Equipment: 11T
?Main Drive Equipment: 121T
?Main Drive Wheel: 56T
?Tail Own Equipment: 15T
?Own Equipment Ratio: 11:1:3.73
?Weight(w/o battery): 860g

Includes:
?T-REX 470L BOSS Set x 1
?380 Carbon Fiber Blades x 1set
?69 Tail Blade x1set
?470MX Brushless Motor(1800KV) x 1
?DS450M Digital Servo x 3
?DS455M Digital Servo x 1
?RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic devices required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1800mAh battery x 1