Align T-REX 450PRO DFC Super Combo Promotion battery

Direction(3GX Programmable Flybarless System) :
Brand name brand-new upgraded 3GX represents a new generation of multi function flybarless system. The dramatically improved efficiency will produce instant influence on any enthusiasts.
3GX is presently the smallest and lightest flybarless system on the market. Two ports to straight connect Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical showed direction on the computer system setup software application directs the user through an action by action setup procedure, allowing for quick setups without omitting any steps.
Support Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity set, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed to lower electronic wire clutters.
Custom specifications have been opened up in 3GX to permit pilots to tweak numerous settings for swashplate and rudder. Settings export function allows custom settings to be shared among buddies.
3GX makes use of brand name brand-new gyroscope sensing units of the greatest specifications when compared to other flybarless systems presently on the market, allowing it to be used under severe conditions. Dual axis plus rudder sensing unit dramatically improves swashplate and rudder correction accuracy compared to last generation 3G. This is clearly noticeable in stable hover in addition to extremely aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electrical powered. The superior vibration resistant attribute appears even when mounted with harder double sided mounting tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The outcome is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with accuracy.
3GX's rudder allows constant rudder feel even under high speed conditions. This excellent control feel will permit pilot of all skill levels to experience the ideal integration in between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position in addition to altitude, and even autonomous method point flights in addition to return home.

Instructions:(T-REX 450PRO DFC):
Equipped with DFC flybarless head assembly, with exceptionally low CG style to decrease wind resistance, offering more direct and accurate flight control reaction and greater top speed.
New detachable main shaft block and servo mounting block to simplify main shaft and servo maintenance.
Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most ideal CG position of the helicopter.
Vertical rudder servo mount style for closer CG, increasing the sportiness of 3D flights.
New improved frame side plates with devoted 3GX mounting place, to simplify wire management and total aesthetics.
New design gyro mounting platform with added length.
Highly rigid and lightweight carbon side plates.
New design double point supported tail control assembly for slop totally free tail, improving on rudder resolution and control precision.
Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
Equipped with Align's brand name brand-new MX series high effectiveness brushless motor.
Highly effective torque tube tail drive style, dramatically lower power loss found on belt driven system.
Streamlined style canopy.

Users need to have a particular principle of security to operate the R/C helicopters.
Be sure to check out and comply with associated security notes of user's manual prior to flying.

Requirements(3GX Programmable Flybarless System):
Operating Temperature Level:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Built in guv function
Optimum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognization

Requirements:(T-REX 450PRO DFC):
Length: 640mm
Height: 204mm
Main Rotor Size: 710mm
Tail Rotor Size: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight(w/o power system): 513g
Flying Weight: Approx. 638g

Devices:
T-REX 450 PRO DFC Kit X 1 set
3GX Flybarless System X 1 set
325D 3G Carbon blades X 1set
RCE-BL35P 35A Brushless ESC X 1
450MX Brushless motor(3400KV) X 1
DS415M (Metal Gear)Digital servo X 3
DS520 Digital servo X 1
3S1P 11.1V 2250mAh/40C x 1

Radio transmitter and electronic equipment required for assembly:

1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gaugeX1
4.11.1V THREE Li-Po 2000~2300mAh batteryX1