Align T-REX 450LP Dominator ARTF (AC)

Align T-REX 450 has been the ideal option for entry level R/C helicopters. To deal with brand-new RC helicopter enthusiasts, Align introduced T-REX 450LP ARTF (Practically Prepared to Fly)*, total with newly launched Align A10 transmitter and Mini GRS flybarless system. This mix enables brand-new enthusiasts  to spend more time flying, instead of many hours of guess work and structure. 

The helicopter utilizes DFC (Direct Flight Control) rotor head, coupled with Mini GRS flybarless system enhanced for T-REX 450LP flight characteristics. It provides outstanding stability ideal for pilots of all levels.

Equipped with digital high voltage servo DS450 and DS455, supports 8.4 high voltage to supply ideal speed and torque efficiency. Paired with the brand-new RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to extremely enhance flight performance.

ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter offered with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Finished function with the mode of helicopter / aircraft / multicopter. Sensible and simple control user interface, and simple to set up.

With the addition of the brand brand-new Align A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the efficiency limitation of flybar helicopter, enhancing both on stability and 3D efficiency, while keeping a down to earth rate level.

1. Automatic Frequency Hopping Digital System, AFHDS is an extremely established remote signal transmission system, providing long range, reducing disturbance, with lower power intake.
2. The frequency variety of the system is 2.4055 ~ 2.475 GHz. The wave band is separated from 160 independent frequencies. The transmitter uses 16 different frequency and 160 different frequency hopping algorithms. Each time the transmitter is powered on a various frequency hopping plan is utilized allowing the transmitter to avoid disturbance of the transmission signal.
3. Each transmitter has unique ID code when binding to the receiver, the receiver saves this unique ID code and just accepts a signal transmitted by the saved ID code transmitter. This process avoids receiving another transmitter signals and significantly improve the anti-interference capability and security.

A roll style slider is utilized to scroll through menu choices providing a fast setup.
20 designs memory with either Chinese or English user interface, 3 aircraft choices (helicopter/airplane/multicopter), Modes 1-4 readily available with optional instructions output, set buzzer warnings, and supported firmware upgrade.

Up to 4 electronic timmers. Ergonomic design for comfy feel and smoother control. The transmitter case is matte black with spined red control sticks to provide a unique, and sensational look.

This system uses a high-quality gain antenna covering the entire readily available bandwidth. With high level of sensitivity receiver, the system can efficiently avoid long-distance transmission signal interference.

Adopted low power rated electronics and an extremely sensitive receiver chip. The transmitter frequency module uses an intermittent transmission signal to minimize transmission power and increase battery life considerably. Provided charging port, simulator support, and firmware update ability.

Equipped with the DFC flybarless head designed for very low CG to minimize wind resistance while providing an enhanced direct control feel. As a basic feature, the brand-new main rotor head block and spindle design is included. New designed 325 3D main rotor blades are steady and nimble leading to enhanced flight efficiency for the novice or 3D pilot.

Align has more than 25 years of experience with motor core technical knowledge. Based upon Threes 11.1V the 460MX (3200KV) motor is particularly designed for the T-REX 450L Boss, featuring remarkable efficiency, high power output, severe torque, low existing, and low operating temperature level. The 460MX motor shares the very same amazing engineering design features as the 850MX Boss motor.

Three programmable throttle speed settings for fast throttle response control. Adjustable BEC output voltage (5~8.5V), car power detection system ideal for TWO~6S Li battery, a continues 3A existing rating, a burst rating of 6A, constant existing 45A and a rise existing 60A for 15 seconds.

New CNC metal support main frame brace is installed with the frame mounting bolts increasing the main frame strength to enhance flight stability for the novice or the 3D pilot. The strong support of the frame is easily felt throughout severe 3D maneuvers. Likewise, the elegant look of red anodized and silver color frame brace enhances the high-end look of the T-REX 450L.

Carbon main frames utilizes composite integration innovation to embed the battery mounting rails straight into the frames. This high-end production process enables the clever usage of open area in the frame body for a more rigid frame structure to enhance flight efficiency. The T-REX 450L cleverly expands on the core concepts of the T-REX 450Pro design to continue our design excellence.

Designed with direct to swash control, and a one-piece main bearing block with incorporated servo installs for simplified servo installation is aesthetically pleasing. New double bearing design DS450 servos minimize deadband and increase durability feature enhanced torque and speed.

1. Special design for ALIGN little helicopters. It's light and simple.
2. Assistance the current brand-new ALIGN A10 Radio (10-channel/A.BUS system) for the very best working operation.
3. Assistance T-REX 250/450/470/500 designs, no need to setup, exceptional flight efficiency for the novice or 3D pilot.
4. Assistance JR DSM2 and Spektrum DSM2/DSMX satellite. Built-in Futaba S-FHSS 2.4GHz support for Futaba S-FHSS transmitter.

 New sliding battery tray with locking system and frame incorporated mounting rail provides simple battery access. The design likewise provides additional battery defense.

New anti-rotation guide with embedded anti-wear product to minimize the wear in between the swashplate long ball and the guide.

 Horizontal rudder servo mount designed for enhanced center of gravity (CG) to improve Novice or 3D flying.

Included tail boom support bridge to increase the rigidness of the general tail boom to enhance control.

 Brand brand-new tail blade grips which make use of thrust bearings to enhance rudder precision control while increasing the life of the bearings. New 65 mm tail rotor blades combined with the 360mm main rotor blades add to enhanced tail authority.

New double tail sider support assembly for a slop complimentary tail to enhance rudder resolution and control.

 1. Ideal for worldwide AC 100V~240V.
2. Voltage balancing charging appropriates for TWO 7.4V and THREE 11.1V lipo batteries.
3. Instantly remedy out of balanced cells, and instantly charge cells with low voltage.
4. Auto-detected charge status display. (Red light: while charging Green light: end of charging)
5. Reverse polarity (caution beep) and integrated short defense.
6. Aluminum alloy shell with an internal cooling fan for effective heat dissipation.

1. Cells are inspected to ensure coordinating cells are utilized throughout manufacturing to ensure high-performance battery production. The best option for the T-REX 450 helicopter series or other designs such as aircrafts and cars. 
2. Max Constant Discharge: 30C(66A), Burst Discharge: 40C(88A). Regular operating temperature level is approx. 40-65°C (within 80% of rated discharge). Max. Temperature level: 80°C.

 Standard equipment

.A10 Transmitter x 1
.A6B Receiver x 1
.RCE-BL45P ESC x 1
.460MX Brushless motor(3200KV/2222) x 1
.DS450 Digital servo x 3
.DS455 Digital servo x 1
.MINIGRS Flybarless System x 1
.Balance Battery charger RCC-3SX x 1
.3S1P 11.1V 2200mAh/30C Battery x 1

MINIGRS Spec

.Running voltage range: DC 3.5~8.4V
.Running existing intake: <100mA @ 4.8V
.Rotational detection rate: ±300°/sec
.Rudder yaw detection rate: ±600°/sec
.Sensor resolution: 12 BIT
.Swashplate Support: 120° CCPM Swashplate
.Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
.Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
.Operating temperature: -20? ~ 65?
.Operating humidity: 0% ~ 95%
.Comply with RoHS
.Size: 37.6x22.4x13mm       A10 Specification

       .Channel: 10-Channel
       .Available Models: helicopter/airplane/multicopter
       .Frequency range: 2.4055 ~ 2.475 GHz
       .Power: no higher than 20dBm
       .System Mode: 2.4G system AFHDS 2A
       .Suitable Voltage Range: 4.0 ~ 6.0V DC
       .Receiving Distance: the open ground no interference < 1000M
       .Low Voltate Warning: Lower than 4.2V
       .Weight: 487g (excluded battery)
       .Size: 187x89.6x215mmBalance Charger RCC-3SX Specification

.Input Voltage: AC 100V~240V(50/60Hz)
.Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
.Supported Battery Type: Li-polymer / Li-ion
.Charging Method: CC/CV
.Charging Current: 2A
.Size: 123x74.3x32mm
.Weight: 260gBattery Specification

.Output: 11.1V 2200mAh 24.4Wh(3S1P)
.Supports 5C charging
.Dimension: 104x36x22mm
.Weight: 165g 
.14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A T-REX 450L Specification

.Length: 705mm
.Height: 205mm
.Width: 110mm
.Main Blade Lenght: 325mm
.Main Rotor Diameter: 734mm
.Tail Rotor Diameter: 171mm
.Motor Drive Gear: 11T
.Main Drive Gear: 121T
.Autorotation Tail Drive Gear: 106T
.Tail Drive Gear: 26T
.Drive Gear Ratio: 11:1:4.07
.Weight(w/o battery): 730gAccessories

.T-REX 450L Kit Set x 1 set
.MINIGRS Flybarless System x 1 set
.A10 Transmitter x 1
.325 Carbon Fiber Blades x 1 set
.RCE-BL45P ESC x 1
.460MX Brushless motor(3200KV/2222) x 1
.DS450 Digital servo x 3
.DS455 Digital servo x 1
.3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
.Balance Charger RCC-3SX x 1 set
.1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge 
2.Swashplate Leveler

*User is required to install tail assembly to the body of the helicopter and reconfirm set-up before flight.