Align T-Rex 450 Pro Carbon Stabilizer 1.2mm

Features: Carbon horizontal stabilizer x 1 (1.2mm)
Carbon vertical stabilizer x 1 (1.2mm)
Vertical stabilizer install x 1

Below is an additional thing that compliments the thing being gone over.

Tail Boom Brace

Use for T-REX 450 Pro / 450 Sport.
Specifications:
Tail boom brace x 2

This thing is regularly purchased with the above pointed out thing.

450DFC Main Shaft

Use for T-REX 450DFC. H45162/162QN

Requirements:
450DFC Main shaft x 2
Socket Button Head Collar Screw x 2(M2x12mm)
M2 nut x 2
Weight:33g

This thing compliments the main item below.

450DFC Linkage Rod Set

Use for T-REX 450DFC(H45162/45162QN).
Must with H45165A

Requirements:
450DFC Linkage rod A ? 4
450DFC Ball link ? 4

You will enjoy this product if you have the product above pointed out.

450L Torque Tube

Use for T-REX 450L / other 450 series.
Must with:450L Tail Linkage Rod(H45T004XXW).

Requirements:
Torque tube x 1
Torque tube end x 2
Torque tube bearing holder × 1
Bearing MR84ZZ x 1(F4xF8x3mm)
450L Tai boom x 1(F11xF12x387mm)
Max. effect torque:12~14kg.cm
Max. effect torque:166.68~194.46oz-in

The listed below thing likewise pairs really well with the thing being gone over.

68 Tail Blade

Use for T-REX 450.

Requirements:
68mm Tail blade ? 2 pcs

The listed below thing likewise pairs really well with the thing being gone over.

DS430M Servo Gear Set

Use for DS430M servo.

Requirements:
DS430M gear G1x1
DS430M gear G2x1
DS430M gear G3x1
DS430M gear G4x1
DS430M gear G5x1

This thing is regularly purchased with the above pointed out thing.

F4-8M Thrust Bearing H45R002XX

Use for T-REX 450.
Must with:450 Feathering Shaft(H45H006XXW).

Requirements:
F4-8 Thrust Bearing x 2(Φ4xΦ8x3.3mm)
Washer x 2(Φ4xΦ6.5x0.4mm)

Many others have actually purchased this thing together with the thing that you are presently reading about.

DS415M Servo Gear

Use for DS415M/416M servo.
also used for HSD41601

Requirements:
DS415M gear G1x1
DS415M the gear G2x1
DS415M gear G3x1
DS415M gear G4x1
DS415M gear G5x1

This is a great enhancement to the thing presently being gone over.






Below is an additional thing that compliments the thing being gone over.

Torque Tube Bearing Holder

Requirements:
Torque tube drive bearing holder x 1(Φ5.5xΦ11.25x8mm)
Bearing MR84ZZ x 1(Φ4xΦ8x3mm)

Below is an additional thing that compliments the thing being gone over.

Frame Hardware

Requirements:
Socket button head screw x 26(M2.5x5mm)
Socket button head screw x 2(M2.5x8mm)
Socket button head self tapping screw x 14(T2.6x6mm)