Align T-REX 450 Plus DFC Super Combo RTF Helicopter DC Charger Version

This is the Align T-REX 450 Plus DFC Super Combination Ready-To-Fly Helicopter. The T-REX 450 has been a perfect option for entry level R/C helicopter pilots for years. To cater to the next generation of enthusiasts, Align has established the Ready to Fly T-REX 450 PLUS DFC! The Align T6 2.4GHz transmitter and 3GX MR flybarless system are included with this fully put together helicopter, enabling you to obtain the machine air-borne faster than before by eliminating assembly and a bulk of the setup process. The only additional devices that is required to complete the assembly is a pitch gauge, swashplate leveler and a power supply for the battery charger. As soon as those small setup procedures are total, merely charge the included 3S battery with the included battery charger, and you're ready to fly!

The helicopter features the renown DFC rotor head assembly, coupled with the 3GX MR flybarless system that has been established to fit the T-REX 450 PLUS flight qualities, supplying maximum stability for pilots of all levels. However, that does not suggest that the 3GX MR lacks adjustability! Lovers that want to fine tune the 3GX MR even further can do so by following a few easy steps. Additionally, the 3GX MR has a FHSS 2.4GHz receiver integrated in, supplying an area conserving two-in-one package!

The Align T6 6-channel radio system system makes use of Futaba's 2.4GHz S-FHSS frequency hopping innovation and features a complete variety of helicopter functions, such as throttle/pitch curve, stunt mode switch, double rate, rapid change and more. The T-REX 450 PLUS DFC pushes past the efficiency restrictions found with traditional flybar helicopters, supplying rock strong stability and amazing 3D efficiency, while at the very same time keeping a down to earth price!

Features:

Factory put together and tuned RTF version. Plug in a battery and experience instant flight.
Align T6 Radio system makes use of Futaba 2.4GHz S-FHSS frequency hopping innovation, with total helicopter functions & a 15 design memory.
Built in normal flight mode and stunt flight mode, with two step double rate settings.
Equipped with the low CG DFC rotor head, efficiently reducing wind resistance throughout flight, supplying the most direct and exact control feel back to the pilot.
Equipped with 3GX MR flybarless system, with integrated in FHSS 2.4GHz receiver function, for an easier and more direct setup, with settings optimized for the T-Rex 450 Plus DFC.
Four piece frame plate style with anchored servo mounting platform for fast servo install/removal without mounting nuts.
Narrow lower frame plate and base plate style enhances strength, rigidness and agility.
Specially developed in-between frame rudder servo mount for central CG place for enhanced 3D flying, while lessening crash damages to rudder servo.
Equipped with MX series high efficiency brushless motor, with significantly enhanced cooling efficiency for excellent power output.
Equipped with REC-BL35P brushless controller featuring step-less adjustable BEC voltage between 5V to 6V.
Devoted rudder gyro mounting platform to separate vibration from the tail, improving gyro performance.
Re-designed battery mounting platform with integrated ESC mount for streamlined electronic devices mounting.
High precision tail pitch control assembly with aesthetically pleasing and functional design.
Weighted tail blade grips efficiently increases smoothness of rudder pitch action.
Aerodynamic canopy airbrushed with colorful graphics.
Includes 3S 2200mAh 30C lithium polymer battery and balance battery charger.
3GX MR Requirements:

Running Temperature level: -10~60 degree

Ideal Voltage Variety: DC 3.5~8.4V

Running current usage: <100mA @4.8V

Operating humidity: 0%~95%

RoHS certified: Yes

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 37.4x20.5x12.6mm

Weight: 9g

450 Plus Specifications:

Length: 634mm

Height: 202mm

Main Rotor Diameter: 715mm

Tail Rotor Diameter: 158mm

Motor Drive Gear: 11T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 106T

Tail Drive Gear: 25T

Drive Gear Ratio: 1:10:4.24

Flying Weight: Approx. 584g

Includes:

(1) T-REX 450 Plus DFC Kit
(1) 3GX MR Flybarless System
(1) ALIGN T6 6-Channel Transmitter
(1) 325D 3G Carbon blades set
(1) RCE-BL35P 35A Brushless ESC
(1) 450MX Brushless motor (3400kV)
(3) DS415M Metal Gear Digital servos
(1) DS425M Digital servo
(1) 3S1P 11.1V 2200mAh/30C Li-polymer Battery
(1) RCC-3SD DC Lithium Battery Balance Charger
(4) 1.5V AA Zinc-Carbon Batteries
Needed to Complete:

Pitch gauge
Swashplate leveler
Power supply (For battery charger)