Align T-REX 450 Plus DFC Super Combo BTF

Instruction:
T-REX 450 has actually been the ideal option for entry level R/C helicopters and T-REX 450 PLUS is created for beginners. The fully put together helicopter can be flown immediately just by plugging in a charged battery, permitting the pilot to bypass assembly and change procedure. This T-REX 450 PLUS DFC is a helicopter that using flybarless system.
The helicopter makes use of DFC rotor head assembly, coupled with 3GX MR flybarless system enhanced for T-REX 450 PLUS flight qualities. Without any change or tuning, this combination will supply optimal stability suitable for pilots of all levels.
For those enthusiasts who wish to fine tune 3GX MR even further, it can be done through a couple of simple steps. In addition, 3GX MR has a FHSS 2.4GHz receiver integrated in, offering an all in one package.
With the addition of the brand name new 3GX MR, the T-REX 450 PLUS DFC pushes past the efficiency constraint of flybar helicopter, improving both stability and 3D efficiency, while maintaining a down to earth rate level

Guidelines:(T-REX 450 Plus DFC BTF)
T-REX 450 PLUS DFC BTF（Bind To Fly）total package was put together and tuned at the factory. Need to use S-FHSS system transmitter to bind and fly. Assistance Futaba S-FHSS system.
Geared up with the low CG DFC rotor head, effectively decrease wind resistance during flight, offering the most direct and accurate control feel back to the pilot, and shows thrilling 3D efficiency and inconceivable flight speed.
Geared up with newly released 3GX MR flybarless system, with FHSS 2.4GHz receiver for integrated in receiver function, for easier and more direct setup, with setting enhanced for T-Rex 450 Plus DFC, leading to more stable and more preferable control feel than before.
4 piece frame plate style with inserted servo installing platform for fast servo install/removal without installing nuts.
Narrow lower frame plate and base plate style to reinforce rigidity and improve flight dexterity.
Specifically created between frame rudder servo install for centralized CG area to benefit 3D flying, while lessening crash damages to rudder servo
Geared up with MX series high performance brushless motor, with significantly improved cooling performance for excellent power output.
Geared up with new design REC-BL35P brushless controller featuring step-less adjustable BEC voltage in between 5V to 6V .
Committed rudder gyro installing platform to separate vibration from tail transmission, improving gyro efficiency.
Freshly created battery installing platform with incorporated ESC install for streamlined installing of electronic devices.
High precision tail pitch control assembly with visually pleasing and functional style. Weighted tail blade grips effectively increases smoothness of rudder pitch action.
Brand-new design aerodynamic canopy airbrushed with colorful graphics.

Users must have a specific principle of security to run the R/C helicopters.
Make sure to check out and abide by related safety notes of instruction manual prior to flying.

Specification(3GX MR):
Operating Temperature:-10~60 degree
Appropriate Voltage Range:DC 3.5~8.4V
Operating existing usage:<100mA @4.8V
Operating humidity:0%~95%
RoHS certified
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:37.4x20.5x12.6 mm Size
Weight:9g Weight

Specification:(T-REX 450 Plus DFC BTF):
Length: 634mm
Height: 205mm
Main Rotor Diameter: 715mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 11T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10:4.24
Flying Weight: Approx. 584g
Color carton:27.3x10x6.6cm
Outer carton:56x31x28cm ,24sets/ctn

Accessories:
T-REX 450 Plus DFC Kit Set X1 set
3GX MR Flybarless System X1 set
325D 3G Carbon blades X1set
RCE-BL35P 35A Brushless ESC X1
450MX Brushless motor(3400KV) X1
DS415M (Metal Gear)Digital servoX3
DS425MDigital servoX1

Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler
3.3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
4.ALIGN T6 of Futaba S-FHSS 2.4G Transmitter x 1