Align T-Rex 250 Pro DFC Super Combo Helicopter Kit w/Motor/ESC/Gyro/S

3GX Programmable Flybarless System:
Brand name brand-new upgraded 3GX represents a new generation of multi function flybarless system. The significantly enhanced efficiency will produce immediate impact on any enthusiasts.
3GX is presently the smallest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a basic process. In addition, the 3GX can support all of the CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical showed guideline on the computer setup software guides the user through a step by step setup process, permitting quick setups without leaving out any steps.
Support Bluetooth connection. With the soon to be launched Bluetooth connection kit, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to decrease electronic wire clutters.
Custom criteria have actually been opened up in 3GX to enable pilots to tweak various settings for swashplate and rudder. Settings export feature permits custom settings to be shared amongst buddies.
3GX utilizes brand brand-new gyroscope sensing units of the greatest specs when compared to other flybarless systems presently on the marketplace, allowing it to be utilized under extreme conditions. Double axis plus rudder sensing unit significantly improves swashplate and rudder correction accuracy compared to last generation 3G. This is plainly obvious in steady hover in addition to highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The remarkable vibration resistant quality appears even when installed with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with an entirely re-written firmware. The result is a significant stability improvement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX is able to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flips type of maneuvers are quickly accomplished with accuracy.
3GX's rudder permits constant rudder feel even under high speed conditions. This exceptional control feel will enable pilot of all ability levels to experience the best combination between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position in addition to altitude, and even autonomous method point flights in addition to return home.

3GX Programmable Flybarless System:
Running voltage range:DC 3.5V~8.4V
Running present usage:<80mA @4.8V
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Sensor resolution:12bit
Supports 90/120/135/140 CCPM swashplates
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Supports Wide/Narrow Bandwidth Digital and brushless servos
Compatible with 2 to 5 blades rotor heads
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Field setup without the use of a PC
Support up to 6 servos
Automatic servo type recognization
Operating Temperature:-20~60 degree
Operating Humidity:0%~95%
Size:36.5x25.2x15.6 mm Size
Weight:11g

Specification:
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:108mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):260g

Standard equipment:
RCE-BL15P 15A Brushless ESC x 1
RCM-BL250MX(3600KV) Brushless motor x 1
DS415M Digital servo x 3
DS425M Digital servo x 1
3GX Flybarless System x 1

Accessories:
T-REX 250 PRO Kit Set x 1 set
250DFC Main Rotor Head Upgrade Set x 1set
3GX Programmable Flybarless System x 1 set
205 main blades x 1set
205D Carbon main blades x 1set
RCE-BL15P 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250MX(3600KV) Brushless motor x 1
Motor ponion gear 15T x 1
DS425M Digital servo x 1
DS415M Digital servo x 3
Clip x 1
#00 Philips screw driver x 1
0.9mm Hex head wrench x 1
1.3mm HSS Hexagon screw driver x 1

Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge x 1
4.11.1V 3S Li-Po 850mAh battery x 1