Align T-Rex 250 Plus Dfc Rtf

Directions:
The fully assembled helicopter can be flown right away just by plugging in a charged battery, allowing the pilot to bypass assembly and modification process. T-REX 250 PLUS DFC complete bundle was assembled and tuned at the factory. Prior to you can fly, This fully assembled helicopter can be flown right away just by plugging in a charged battery, allowing the pilot to bypass assembly and modification process.
The helicopter uses DFC rotor head assembly, paired with 3GX MRS flybarless system enhanced for T-REX 250 PLUS DFC flight characteristics. With no modification or tuning, this combo will offer optimal stability appropriate for pilots of all levels.
For those enthusiasts who wish to fine tune 3GX MRS even further, it can be done through a few simple steps.
With the addition of the brand brand-new 3GX MRS, the T-REX 250 PLUS DFC pushes past the efficiency restriction of flybar helicopter, improving both stability and 3D efficiency, while maintaining a down to earth rate level.

Features:
1. T-REX 250 PLUS DFC BTF（Ready To Fly）complete bundle was assembled and tuned at the factory. This fully assembled helicopter can be flown right away just by plugging in a charged battery, allowing the pilot to bypass assembly and modification process.
2.Align T6 R/C system uses Futaba 2.4G S-FHSS frequency hopping 6 channel transmitter, with complete helicopter functions in addition to 15 model memory.
3.Integrated in normal flight mode and stunt flight mode, with two step double rate settings.
4. Brand-new design linkage rod style, complete assembly increases linkage rod rigidness, allowing the pitch slider (fan) to be left out, leading to a head assembly that is much streamlined and stiff.
5. Geared up with newly released 3GX MRS flybarless system, with FHSS 2.4GHz buit in get function, support Spektrum DSM2/DSMX or JR DSM2 satellite. For easier and more direct setup, with setting enhanced for T-Rex 250 Plus DFC, leading to more stable and more preferable control feel than before.
6. Created particularly for DFC rotorhead system, improving DFC connecting rod's strength and lessening linkage detachment during extreme flight maneuvers.
7. Material integration innovation utilized in frames, improving rigidness and streamlines upkeep.
8. Brand-new design fast removable gyroscope installing platform incorporated with rudder servo mount, efficiently uses frame?s inner space for streamlined upkeep.
9. New anti-rotation guide.
10. Reinforce landing skids improved its resilience.
11. High efficiency shaft tail drive system, efficiently increase rudder efficiency and decrease power loss.
12. Utilizes newly developed, greatest specification and superior anti-wear material to increase the overall strength and resilience for torque tube drive equipment. Effectively minimize equipment striping and crash damage.
13. Single system tail belt system with the brand-new counter weighted tail blade grips make it easier assembly and improving rudder efficiency.
14. Utilizes double point attachment style for no play and greater accuracy control feel.
15. Recently styled aerodynamically canopy for the ultimate fit.

Users must have a particular concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual prior to flying.

Requirements(3GX MRS):
Operating Temperature:-10~60 degree
Suitable Voltage Range:DC 3.5~8.4V
Operating current intake:<100mA @4.8V
Operating humidity:0%~95%
RoHS certified
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:37.6x22.4x13 mm Size
Weight: 10g Weight

Specification:(T-REX 250 PLUS DFC):
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:100mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):250g

Accessories:
T-REX 250 PRO Kit Set x 1 set
205D Carbon Fiber Blades x 1 set
RCM-BL250MX(3600KV) Brushless motor x 1
ALIGN T6 of Futaba S-FHSS 2.4G Transmitter x 1
3GX MRS Programmable Flybarless System X 1set
DS425M Digital servo x 1
DS415M Digital servo x 3
RCE-BL15X Brushless ESC x 1 set
37mm Tail Blade x 1 set
Balance Charger RCC-3SX x 1
11.1V 3S Li-Po 850mAh battery x 1
1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:
1.Pitch gauge x 1