Align T-Rex 250 Plus DFC BTF

Instructions:
The fully assembled helicopter can be flown right away just by plugging in a charged battery, permitting the pilot to bypass assembly and adjustment process. T-REX 250 PLUS DFC complete package was assembled and tuned at the factory. Prior to you can fly, you have to just bind the design with transmitter and either Futaba S-FHSS system / Spektrum DSM2/DSMX / JR DSM2 appropriately following the manual instruction.
The helicopter makes use of DFC rotor head assembly, coupled with 3GX MRS flybarless system optimized for T-REX 250 PLUS DFC flight qualities. Without any adjustment or tuning, this combination will supply optimal stability appropriate for pilots of all levels.
For those lovers who want to tweak 3GX MRS even better, it can be done through a few basic steps.
With the addition of the brand name new 3GX MRS, the T-REX 250 PLUS DFC presses past the efficiency restriction of flybar helicopter, enhancing both stability and 3D efficiency, while maintaining a down to earth cost level.


Features:
1. T-REX 250 PLUS DFC BTF(Bind To Fly)complete package was assembled and tuned at the factory. Appropriate for Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX system transmitter to bind and fly.
2. Brand-new style linkage rod design, complete assembly increases linkage rod rigidity, permitting the pitch slider (follower) to be omitted, leading to a head assembly that is much simplified and rigid.
3. Geared up with newly launched 3GX MR flybarless system, with FHSS 2.4GHz buit in receive function, assistance Spektrum DSM2/DSMX or JR DSM2 satellite. For simpler and more direct setup, with setting optimized for T-Rex 250 Plus DFC, leading to more steady and more preferable control feel than before.
4. Designed specifically for DFC rotorhead system, enhancing DFC linking rod's strength and reducing linkage detachment throughout severe flight maneuvers.
5. Material integration innovation utilized in frames, enhancing rigidity and simplifies maintenance.
6. Brand-new style quick removable gyroscope installing platform incorporated with rudder servo install, efficiently makes use of frame's inner space for simplified maintenance.
7. New anti-rotation guide.
8. Enhance landing skids boosted its sturdiness.
9. High effectiveness shaft tail drive system, efficiently increase rudder efficiency and decrease power loss.
10. Utilizes newly established, highest specification and remarkable anti-wear product to increase the general strength and sturdiness for torque tube drive gear. Successfully minimize gear striping and crash issue.
11. Single unit tail belt unit with the new counter weighted tail blade grips make it much easier assembly and enhancing rudder effectiveness.
12. Utilizes dual point accessory design for zero play and greater precision control feel.
13. Newly styled aerodynamically canopy for the supreme fit.

Users should have a specific principle of security to operate the R/C helicopters.
Be sure to check out and comply with associated security notes of user's manual before flying.

Specification(3GX MRS) :
Running Temperature:-10~60 degree
Appropriate Voltage Range:DC 3.5~8.4V
Running current consumption:<100mA @4.8V
Operating humidity:0%~95%
RoHS certified
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:37.6x22.4x13 mm Size
Weight: 10g Weight

Specification:(T-REX 250 PLUS DFC)
Length:431mm
Height:150mm
Main Blade Length:205mm
Main Rotor Diameter:460mm
Tail Rotor Diameter:100mm
Motor Ponion Gear:15T
Main Drive Gear:120T
Tail Drive Gear:28T
Drive Gear Ratio:1:8:4.28
Weight(With Motor):250g

Accessories:
T-REX 250 PRO Kit Set x 1 set
205D Carbon Fiber Blades x 1 set
RCM-BL250MX(3600KV) Brushless motor x 1
3GX MRS Programmable Flybarless System X 1set
DS425M Digital servo x 1
DS415M Digital servo x 3
RCE-BL15P Brushless ESC x 1 set
37mm Tail Blade x 1 set

Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 of Futaba S-FHSS 2.4G Transmitter or JR/Spektrum 2.4GHz Transmitter(DSM2?DSMX)
2.Pitch gauge x 1
3.11.1V 3S Li-Po 850mAh battery x 1