Align New Landing Skid

This is an upgrade landing skid set for the Align 600 and 600N line of helicopters. More stiff than the conventional landing gear these have a lowered height for a lower center of mass preferable for 3D flying.

Plan consists of:

2 - Black landing skids approximately 39g each.




Below is a great thing that several others have actually bought at the exact same time.

Skid Pipe

Apply to T-REX 550E.

Requirements:
Skid pipe x 2(Φ7.4xΦ9x294mm)
Skid pipe end cap x 4

The listed below thing additionally sets really well with the thing being gone over.

Skid Pipe/Black

Usage for T-REX 600/600 Nitro
Requirements:
Skid pipe x 2(Φ9x310mm)
Skid pipe end cap x 4

Below is a great thing that several others have actually bought at the exact same time.

450DFC Main Shaft

Usage for T-REX 450DFC. H45162/162QN

Requirements:
450DFC Main shaft x 2
Socket Button Head Collar Screw x 2(M2x12mm)
M2 nut x 2
Weight:33g

Many others have actually gotten this thing together with the thing that you are presently reading about.

M0.6 Torque Tube Front Drive Gear Set/ 26T

This is the Align M0.6 26T Torque Tube Front Drive Gear Set for the T-Rex 450DFC.

Functions:

Black and silver colored
Made of metal and plastic
For the Align T-Rex 450DFC

Includes:
One Align M0.6 26T Torque Tube Front Drive Gear Set

Below is a great thing that several others have actually bought at the exact same time.

Torque Tube Rear Drive Gear Set

This is the Align Torque Tube Rear Drive Gear Set for the T-Rex 450.

Functions:

Black and silver colored
Made of metal and plastic
For the Align T-Rex 450

Includes:
One Align Torque Tube Rear Drive Gear Set

You will enjoy this product if you have the product earlier pointed out.

M0.8 Torque Tube Front Drive Gear Set/34T

Usage for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

You will enjoy this product if you have the product earlier pointed out.

Torque Tube Rear Drive Gear Set

Usage for T-REX 550/600 class.

Requirements:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

Many others have actually gotten this thing together with the thing that you are presently reading about.

Landing Skid

Requirements:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Below is a great thing that several others have actually bought at the exact same time.

Main Shaft Set (2)

This is a replacement Align Main Shaft Set, and is intended for use the Align 550EFL and 600E Pro helicopters.
Includes:

(2) Main shaft (6x10x177mm)
(2) Socket collar screw (M3x20mm)
(2) 3 nut

 

Below is one more thing that compliments the thing being gone over.

325D 3G Carbon Fiber Blades

This is a set of Align 325D Pro Carbon Fiber Blades, and are intended for use with the Align T-REX 450 family of helicopters. These blades are made from 3K carbon fiber material, with a unique forming method that improves anti-twist, making these blades appropriate for extreme 3D flight.
Specifications:

Shape: Balanced wing

Length: 325x32mm

Width: 4.7mm

Shaft Diameter: 3mm

Weight: 46g/set

Below is one more thing that compliments the thing being gone over.

Tail Boom (Black)

Requirements:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

This thing compliments the above gone over thing.

Torque Tube

Usage for T-REX 550E.

Requirements:
Torque tube x 1
Bearing MR148ZZ x 1(Φ8xΦ14x4mm)

Many others have actually gotten this thing together with the thing that you are presently reading about.

Tail Boom Brace

Request T-REX 550E

Requirements:
Tail boom brace set x 2
Tail boom brace x 2(Φ1.9xΦ3.9x412mm)
Self tapping screw x 2(M3x10mm)
Self tapping screw x 2(T3x10mm)
M3 washer x 4(Φ3xΦ8x1mm)