Align Frame Hardware

Specifications:
Socket button head screw x 26(M2.5x5mm)
Socket button head screw x 2(M2.5x8mm)
Socket button head self tapping screw x 14(T2.6x6mm)

This product is often gotten with the above stated product.

Tail Boom Brace

Use for T-REX 450 Pro / 450 Sport.
Specifications:
Tail boom brace x 2

Want an additional terrific product to compliment the above stated product?

Ball Link

Use for T-REX 450 SE/V2/PRO/Sport.
Specifications:
Ball link x 12(11x2.3mm)

This is a amazing enhancement to the product presently being reviewed.

325 Carbon Fiber Blades

Apply to Trex450 all types

Specifications:
Forming: In proportion wing
Length:325x32mm
Width:4.7mm
Shaft Size:3mm
Weight: Appro 46g/set

Want an additional terrific product to compliment the above stated product?

450DFC Main Rotor Head Upgrade Set (Black)

This is the Align 450DFC Main Rotor Head Upgrade Set and is intended for usage with the Align T-Rex 450 Pro, 450 Sport and 450 Sport V2 helicopters. Utilizing the 700 DFC/600 DFC's head design, the 450 DFC flybarless rotor head system utilizes an extremely low CG design, successfully lowering resistance throughout flight, while at the same time providing increased flight responsiveness and accuracy. The result is superior 3D performance and unimaginable flight speed with an extremely attractive design. Upgrading to the 450DFC rotor head assembly is very easy; simply change the head block consisted of in the 450DFC set, connect the 450DFC linkage assembly, and change the primary shaft with 450DFC primary shaft. The existing swashplate is kept in the upgrade.



Features:

Low CG and brief primary shaft design considerably reduces flight resistance, and successfully enhances T-Rex 450?s 3D performance and speed.
Re-designed linkage rods. Total assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be left out, leading to a head assembly that is simplified and stiff.
Upgrading to the 450DFC rotor head assembly is very easy; simply change the head block consisted of in the 450DFC set, connect the 450DFC linkage assembly, and change the primary shaft with 450DFC primary shaft. Existing swashplate is kept in the upgrade.
The damper rubbers are produced making use of POM product, smooth surface area, with superior anti-wear quality.
Appropriate for T-REX 450 PRO/SPORT/SPORT V2 flybarless system.
Includes:
(1) 450DFC Main Rotor Head Assembly-Blue
(2) 450DFC Main Blade Grip-Blue
(4) 84ZZ Bearing
(2) 450DFC Damper rubber (POM 4x6.5x3.8mm)
(2) Spacer
(1) Socket collar screw (M2x12mm)
(1) M2 Nut
(2) M2 collar screw (M2x15mm)
(2) 450DFC Main rotor grip arm integrated control link
(2) 450DFC Main rotor grip linkage bearing sleeve
(4) 681ZZ-d2 Bearing (2x4.5x2mm)
(2) 450DFC Linkage rod A
(2) Ball link
(1) 450DFC Main Shaft
(2) Socket collar screw (M3x16mm)
(2) M3 Nut (M3)
(2) Washer (2x3.6x0.2mm)

This product compliments the main item here.

Hexagon Screw Driver

Utilizing on heli's M2 socket screw and M3 socket screw!

Specifications:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1