Align Castle EDGE HV 160 Brushless ESC

Instructions:
The brand-new Castle Edge ESC offer Brand-new Phoenix Controller AUX Line within more options as below:
a. Gain input-
Permit the ESC to utilize an extra receiver channel to change the guv gain.
b. RPM out-
Toggles the AUX Line for each electrical commutation. Divide this number by your number of magnetic pole sets for mechanical RPM.
c. Extreme load detection-
Prevent damage triggered by large current spikes usually triggered by too much load or potentially a short in the motor wires.
d. Audible Beacon-
The controller will produce an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is just produced if the motor is not running
e. Log Data Reset Portion-
The users may select a portion of the information buffer which all information is removed upon ESC boot up.
This helps to make sure that the most current flight is logged.
Comprehensive heli include set, consisting of direct entry guv mode, autorotation with bailout, and soft start abilities to secure your tailoring (see the screenshot on the right for more information).
Opto isolated throttle cable television helps in reducing radio disturbance.
Complete information logging abilities. Procedure amp draw, controller temperature level, motor rpms, battery voltage and ripple and more. Take the secret from electrical flight.

Requirements:
Rise current:160Amps
Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Max Supporting input voltage:50V(12s Li-Po/36 cells Nicad/NiMH)
Size:111X52X30.6mm
Weight:224g(With wires)
Please download the
lastest version for your Castle Link

KEEP IN MIND: Not consisting of BEC. User have to offer the power for receiver and servo.