Align Castle EDGE HV 120 Brushless ESC

Instructions:
The brand-new Castle Edge ESC offer New Phoenix Controller AUX Line within more alternatives as listed below:
a. Gain input-
Enable the ESC to make use of an additional receiver channel to adjust the guv gain.
b. RPM out-
Toggles the AUX Line for every single electrical commutation. Divide this number by your variety of magnetic pole pairs for mechanical RPM.
c. Extreme load detection-
Prevent damage triggered by big existing spikes normally triggered by too much load or possibly a short in the motor wires.
d. Audible Beacon-
The controller will produce an audible locator signal from the motor when the AUX LINE is above 50% signal.
The beacon is just produced if the motor is not running
e. Log Data Reset Percentage-
The users might select a portion of the data buffer which all data is erased upon ESC boot up.
This assists to make sure that the most recent flight is logged.
Comprehensive heli include set, consisting of direct entry guv mode, autorotation with bailout, and soft start abilities to protect your gearing (see the screenshot on the right for more information).
Opto isolated throttle cable helps reduce radio interference.
Full data logging abilities. Procedure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electrical flight.

Requirements:
Surge existing:120Amps
Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Max Supporting input voltage:50V(12s Li-Po/36 cells Nicad/NiMH)
Size:86.6X50.6X23.2mm
Weight:148g(With wires)
Please download the
lastest variation for your Castle Link

NOTE: Not consisting of BEC. User have to offer the power for receiver and servo.