Align Canopy Nut

Usage for T-REX 550E/700 Nitro Pro / 700E.

Specs:
Canopy nut x4
Canopy protector x4

Want an additional great item to match the above pointed out item?

Torque Tube

Usage for T-REX 700 Nitro Pro /700E.
Specs:
Torque tube x 1
Torque tube end x 2
Bearing MR148ZZ x 2(Φ8xΦ14x4mm)
Torque tube pin guide x 2(Φ8x12.5x7mm)
Pin x 2(Φ2.5x9.8mm)

Here is an additional item that praises the item being discussed.

Bearing (6901ZZ)

Usage for T-REX 700 Nitro Pro /700E.
Specs:
Bearing 6901ZZ x 2(Φ12xΦ24x6mm)

You will love this product if you have the product just above discussed.

Lipo 3300MAh 22.2V 35C - Ultra Power Series

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer technology, and benefiting from all the technological gains within this remarkable industry. Pulse is about power & performance at a cost that can be afforded. No more does superior power come at a premium cost – Pulse delivers everything in one pulse accelerating punch.

Delivering extreme power for your RC applications, Pulse batteries deliver everything you could envision at a cost never seen. Contributing to the addicting power of Pulse Ultra batteries is the 5C charge rate, permitting you to recharge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to an entirely brand-new level of extreme. If you're looking for power, you just discovered it. Pulse delivers extreme power for extreme pilots, and when it pertains to value, Pulse just cannot be beat.
Feel the pulse, and grab a new Pulse Ultra Battery for your 3D demands!


Specs:
Voltage: 22.2V
Cell Count: 6S
Capacity: 3300mAh
Discharge Rate: 35C
Measurements: 137mm x 42.25mm x 42.50mm (LxWxH)
Weight:
Balance Tap: JST-XH


Product Note:
Pulse batteries do not had power leads, and will require the end user to solder their own style of battery port for the battery to be properly utilized. Pulse batteries come with bare leads covered with heat shrink protection, and are all set for the port of option to be soldered to the positive/negative leads.