Align 6S1P Li-Poly Battery 40C (22.2V/1100mAh)

This is a Align 6S1P Li-Polymer Battery, and is planned for usage with the Align T-Rex 450 line of helicopters.

Features:

This Li-poly battery is utilizing series/balancing design. It features high effective and high discharge, and a inspection machine is utilized to match packs.


Suitable for T-Rex 450 series (450MX Brushless Motor 1700KV).
It is suggest to release the battery within 80% of ranked discharge, keep 90% capability when over 100 cycles, keep 85% capability when over 150 cycles.(The cycle life and effectiveness will minimize due to high current, heat and over-discharge)

Specifications:

Max Constant Discharge: 40C

Burst Discharge: 60C

Nominal Operating Temperature level: Approx. 40-64?C (104-147?F) (within 80% of ranked discharge)

Maximum Temperature level: 80?C (176?F)

Output: 22.2V(6S1P)1100mAh 102Wh

Dimension: 34x108x25.5mm

Weight: 195g

Keep in mind: When utilizing high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capability can't exceed 80% of the max capability of the pack after complete crediting ensure an excellent cycle performance. It is advised to completely charge a brand name brand-new battery prior to utilizing and just release the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.



Do not expose batteries to sunshine or store/charge batteries at the temperature above 35?C or in a closed car. The heat environment could trigger damage to the pack or make it burst. If the battery ends up being hot while quick charging, high current discharging or racing, do not charge the battery up until it has actually cooled completely. Wait about 20 minutes, then inspect prior to charging.