Align 6S1P 22.2V 3300mAh/40C/A Battery

Align 6S2P Li-Polymer battery. TREX 600E PRO suggest to use two Sixes 22.2V lipo batteries linked in series for having both power and flight duration. Max Constant Discharge: 40C, Burst Discharge: 50C. Normal operating temperature is approx. 40-65??C(within 80% of rated discharge). Max. temperature: 80??C. Recommend to discharge the battery within 80% of rated discharge, keep 90% capability when over 100 cycles, keep 85% capability when over 150 cycles.(The cycle life and performance will minimize due to high current, heat and over-discharge). NOTE:
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capability can't surpass 80% of the max capability after full crediting ensure a great cycle performance.Recommend to full charge a brand new battery before utilizing and just discharge the battery 50% for first 5 times to make a great performance of the battery. Please make it a routine to constantly count time for flight, or please set a low voltage defense on ESC (Cell voltage after stopping utilizing can not lower than 3.4V). Do not use the battery at inadequate of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature approximately 35?? in a airtight car. The environment heat might cause the damage or the threat of burst. If the battery ends up being hot while high current discharging or flying, please do not charge the battery instantly. Wait to cool down(about 20 minutes), then inspect to recharge. If against follow the initial factory utilizing guidelines, perhaps cause the battery to pump up or any hazardous accident happens.

Do not leave the charger is running unattended as it may cause a fire.