Align 6S1P 22.2V 3300mAh/40C/A Battery

Line up 6S2P Li-Polymer battery. TREX 600E PRO suggest to use two 6s 22.2V lipo batteries connected in series for having both power and flight period. Max Continuous Discharge: 40C, Burst Discharge: 50C. Typical operating temperature level is approx. 40-65??C(within 80% of ranked discharge). Max. temperature level: 80??C. Recommend to release the battery within 80% of ranked discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will decrease due to high current, high temperature and over-discharge). KEEP IN MIND:
When utilizing high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature level. Releasing capacity cannot surpass 80% of limit capacity after complete charging to guarantee an excellent cycle performance.Recommend to complete charge a brand name new battery prior to utilizing and just release the battery 50% for first 5 times to make an excellent efficiency of the battery. Please make it a habit to constantly count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping utilizing can not reduce than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or shop/ charge batteries at the temperature level approximately 35?? in a airtight vehicle. The environment high temperature could trigger the damage or the threat of burst. If the battery ends up being hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then examine to recharge. If against follow the original factory utilizing guidelines, perhaps trigger the battery to inflate or any dangerous accident happens.

Do not leave the battery charger is running unattended as it might trigger a fire.