Align 6S1P 22.2V 2600mAh/40C/A

Specifications:
This Li-poly battery is using series/balancing design, features high effective and high discharge, use a inspection maker to match packs, appropriate for TREX 500 series.
Max Constant Discharge: 40C, Burst Discharge: 50C. Normal operating temperature is approx. 40-65?C(within 80% of rated discharge). Max. temperature: 80?C.
Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and effectiveness will minimize due to high existing, high temperature and over-discharge)

Output:22.2V(6S2P)2600mAh 57Wh
Measurement:43x143x33mm
Weight:418g

KEEP IN MIND:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capacity can't surpass 80% of limit capacity after full crediting ensure a good cycle performance.Recommend to full charge a brand new battery prior to using and just discharge the battery 50% for very first 5 times to make a good effectiveness of the battery. Please make it a practice to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunlight or store/ charge batteries at the temperature approximately 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high existing discharging or flying, please do not charge the battery instantly. Wait to cool down(about 20 minutes), then inspect to charge. If versus follow the original factory using rules, possibly cause the battery to inflate or any dangerous mishap happens.

Do not leave the charger is operating ignored as it may cause a fire.