Align 3S1P Li-Poly Battery 30C (11.1V/850mAh)

This is an Align 3S1P, 30C, 11.1V, 850mAh Li-Polymer Battery. This Li-poly battery features high efficiency and high discharge abilities, making this pack suitable for the TREX 250 series along with model planes, and other application that could gain from a 30C THREE pack with these specifications.

Specifications:
Type: Lithium Polymer
Capacity: 850mAh
Voltage: 11.1V small
Number of Cells: 3
Weight: 70 grams (Not including adapters)
Configuration: 3S1P
Dimensions: 55x30x24.5mm
Maximum Continuous Discharge: 30C
Maximum Burst Discharge: 40C

IMPORTANT:
1) You will require a Li-Poly particular battery charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
2) You need to not over discharge the Li-Poly battery pack.
3) Read the guidelines carefully before operating this battery.

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Releasing capability can't exceed 80% of the max capability of the pack after full crediting make sure a great cycle performance. It is recommended to fully charge a brand name brand-new battery before using and only discharge the battery 50% for very first 5 cycles. Constantly keep an eye on race time and/or set a low voltage caution on ESC (End voltage cannot be lower than 3.2v per cell). Do not utilize the battery that has too low a voltage.

Do not expose batteries to sunshine or store/charge batteries at the temperature above 35?C or in a closed automobile. The high temperature environment could trigger damage to the pack or make it burst. If the battery ends up being hot while fast charging, high current discharging or racing, do not charge the battery till it has cooled entirely. Wait about 20 mins, then check prior to charging.