Align 3S1P Li-Poly Battery 30C (11.1V/850mAh)

This is an Align 3S1P, 30C, 11.1V, 850mAh Li-Polymer Battery. This Li-poly battery features high effectiveness and high discharge capabilities, making this pack ideal for the TREX 250 series along with design airplanes, and any other application that might benefit from a 30C THREE pack with these specifications.

Specifications:
Type: Lithium Polymer
Capacity: 850mAh
Voltage: 11.1V small
Number of Cells: 3
Weight: 70 grams (Not consisting of connectors)
Setup: 3S1P
Dimensions: 55x30x24.5mm
Maximum Constant Discharge: 30C
Maximum Burst Discharge: 40C

CRUCIAL:
1) You will need a Li-Poly particular charger to charge the pack (NiMH or NiCD just chargers WILL NOT WORK!)
2) You must not over discharge the Li-Poly battery pack.
3) Read the instructions thoroughly before operating this battery.

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capability can't exceed 80% of the max capability of the pack after complete charging to make sure an excellent cycle performance. It is recommended to totally charge a brand brand-new battery before using and just release the battery 50% for first 5 cycles. Constantly keep track of race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not utilize the battery that has too low a voltage.

Do not expose batteries to sunlight or store/charge batteries at the temperature above 35?C or in a closed car. The high temperature environment might cause damage to the pack or make it burst. If the battery ends up being hot while quick charging, high existing discharging or racing, do not charge the battery up until it has actually cooled totally. Wait about 20 mins, then inspect prior to charging.