Align 150 Tail Boom

Use for T-REX 150.

Specs:
150 tail boom x 2(3.5x3.5x140mm)
150 Tail motor mount x 2
Socket button head self screw x 2(T1.5x3mm)
Socket button head screw x 2(#0-80x3mm)

Often purchased with the product that you are presently checking out.

150 Main Shaft

Use for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

Want one more wonderful product to enhance the above pointed out product?

150 Landing Skid

Use for T-REX 150.

Specs:
Landing Skid x 2
Landing Skid nut x 8(Φ1.5xΦ3x2mm)
Socket button head self tapping screw x 4(T1.5x3mm)

Want one more wonderful product to enhance the above pointed out product?

20 Tail Blade

Use for T-REX 150.

Specs:
Tail Blade x 4
Length:41.35 mm
Weight:Approx 0.21g/single

This is a great enhancement to the product presently being talked about.

150 Vertical Stabilizer

Use for T-REX 150.

Specs:
Vertical Stabilizer x 2

Several others have actually purchased this product in addition to the product that you are presently checking out.

2S1P 7.4V 250mAh/30C

Use for T-REX 150.

Instruction::
Max Continuous Discharge: 30C. Typical operating temperature is approx. 40-65?C(within 80% of ranked discharge). Max. temperature: 80?C.
Recommend to release the battery within 80% of ranked discharge, keep 95% capability when over 100 cycles, keep 90% capability when over 150 cycles.(The cycle life and efficiency will lower due to high current, high temperature and over-discharge)

KEEP IN MIND::
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Releasing capability cannot exceed 80% of the max capability after full charging to guarantee an excellent cycle performance.Recommend to full charge a brand new battery before using and only release the battery 50% for very first 5 times to make an excellent efficiency of the battery. Please make it a habit to constantly count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not reduce than 3.4V). Do not use the battery at inadequate of voltage.

Do not expose batteries to sunlight or shop/ charge batteries at the temperature up to 35℃ in a airtight automobile. The environment high temperature could cause the damage or the risk of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery right away. Wait to cool off(about 20 mins), then inspect to recharge. If against follow the initial factory using rules, possibly cause the battery to inflate or any dangerous mishap happens.
Do not leave the charger is operating ignored as it may cause a fire.

Specifications:
Output:7.4V250mAh (2S1P)
Dimension:47x21.5x12mm
Weight:15g

Several others have actually purchased this product in addition to the product that you are presently checking out.

120 Main Blades-Black

Use for T-REX 150.

Specs:
Forming: Symmetrical wing
Length:120 mm
Weight:Approx 5.8g/set

Accessories:
Main Blades x 2 set
Main blade Decal x 1 set

Below is a wonderful product that lots of others have actually bought at the exact same time.

150 Feathering Shaft

Use for T-REX 150.

Specs:
150 Feathering shaft x 3(Φ2x16.5mm)
Socket Button Head Screw x 6(#0-80x3mm)
100 Spacer x 6(Φ1.6x3.2x0.2mm)