Align 131T M0.8 Autorotation Tail Drive Gear

This is a replacement Align 131 Tooth M0.8 Autorotation Tail Drive Equipment, and is meant for use with the Align 550, and 600E Pro.






Right here is one more product that praises the product being discussed.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Equipment Set, and is meant for use with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive equipment assembly (4x4.5x51mm)
(1) Front umbrella equipment (20T) (21.2x33.6mm)
(1) Tail umbrella equipment (20T) (21.2x12.5mm)

Note: In order to utilize this torque tube drive equipment set on a T-REX 550, the helicopter should be geared up with the inclined equipment setup. To determine if your helicopter uses inclined gears or straight-cut gears, observe the main drive equipment which will either have inclined or straight-cut teeth.



This product is regularly bought with the above pointed out product.

520 Carbon Fiber Blade Set (550E)

This is an optional Align 520mm Carbon Fiber Main Blade Set, and is meant for use with the Align T-Rex 550 helicopter.


Specifications:

Forming: Symmetrical wing

Length: 520x48x6.5mm

Width: 12mm

Shaft Size: 4mm

Weight: 200g/set



Right here is a fantastic product that lots of others have actually purchased the exact same time.

Cnc Slant Thread Main Drive Gear/ 112T

Usage for T-REX 550E.
Need to with CNC Slant Thread Main Drive Gear/112T(H60G001XXW).

Specifications:
Motor pinion equipment 10T x 1
M4 set screw x 2(M4x4mm)

The below product likewise pairs truly well with the product being discussed.

90mm Carbon Fiber Tail Blade Set (2) (550)

This is a replacement Align 90mm Carbon Fiber Tail Blade Set, and is
meant for use with the T-Rex 550 helicopter.

Functions:

3K carbon fiber material
Forming: Symmetrical wing
Length: 90mm
Width: 4.9mm
Shaft Size: 3mm
Weight: 9g/set




Right here is a fantastic product that lots of others have actually purchased the exact same time.

600PRO MAIN GEAR CASE SET

Usage for T-REX 600E PRO/600EFL PRO.
Use with H70020,H60198,H60199?

Specifications:
One-way bearing HF1216 x 1(F12xF18x16mm)
Main equipment case x 1
Hex socket salf tapping screw x 6(T3x6mm)
One-way bearing shaft x 1(F9xF12x34.7mm)
Washer x 1(F11.5xF18x0.8mm)